-
Emphasis Servers have shipped as Dell GX240's and Dell GX260's. Please see appropriate explanation below. Emphasis GX260 servers have an integrated video card. (These servers started shipping 11/02) 2D servers utilize the integrated video card. There is no need for a Y cable or other hardware...
-
On the older 2d Servers ( Pre 2/03) Video output came from the VGA connection on the back of the Server itself. On the new Servers (post 2/03), the video connection is through the DVI connection and out of the Blue connection labeled monitor 1 from the DVI splitter. This can be a bit of a gotcha as it...
-
We have discovered an apparent bug in Emphasis that I thought you should all be aware of. PROBLEM: Site has an Express facepanel with Emphasis. On some shows, there is about a 4-5 second delay in outputting DMX. Some shows work fine on the same hardware. This problem appears to be caused not by the hardware...
-
Attached is the Troubleshooting Guide for the Sentinal Super Pro Hardware keys provided by Rainbow Technologies. Attachment: 3362.Troubleshooting.SuperPro.pdf
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
From our testing, Strand SN110 nodes seem to require a 6 millisecond idle time after the last stop bit. In order for ETC consoles and DMX nodes and gateways to send DMX to them you must set their DMX Output speed to "slow". A deep clear or reset will change this to "fast", so the...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-27-2009
Filed under: Congo, CongoJr, DMX, Element, Emphasis, Eos, Express, Expression, Ion, KnowledgeBase, Net2, Net3, Obsession, ObsessionII, SmartFade, SmartFadeML
-
Attached is a spreadsheet that will allow you to map out your DMX to EMDX addresses based on universe number. 3632.EDMX_Translation_Charts.xls
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-24-2009
Filed under: CEM+, Congo, CongoJr, Element, Emphasis, Eos, Ion, KnowledgeBase, Legacy Unison, ObsessionII, Sensor+, Unison
-
How to save an Emphasis show file for use in an Expression/Express running software version 3.1 In order for this to work, before saving as 3.1, the Emphasis showfile must be modified to be able to fit into the destination console. This includes setting channel and dimmer counts in the system settings...
-
To globally change the Report Header If the file is created in R8: Go to any report Go to Redesign Headings Make the changes that you need Save the File Select Yes to save globally If the file is created in a version earlier than R8: Go to any report Go to Redesign Headings Change the Title of the report...
-
Problem: The menu bar in Emphasis has disappeared. What causes it: You can grab and move the menu bar so it is in a separate window. If that window gets moved off the screen, you can't grab it back. Solution: To get the menu bar back, you will have to edit the registry in Windows. Here are the steps...