-
Question Why isn't there wallpaper on the desktop? Why doesn't this XP computer look like XP? And where is the task bar at the bottom of the screen? Answer ETC has chosen plain black for the system install since it takes the least processing power for screen redraws. XP tool bars are incredibly...
-
The Windows logo key, located in the bottom row of most computer keyboards is a little-used treasure. Don't' ignore it. It is the shortcut anchor for the following commands: Windows: Display the Start menu Windows + D Minimize or restore all windows Windows + E Display Windows Explorer Windows...
-
Question: If I reinstall my system from the System Install disks, do I need to remove the internal dongle? Answer: No. It works just fine to leave it in there.
-
Question: Is the internal Emphasis USB dongle the same as the WYSIWYG boxed product USB dongle that comes with an Emphasis system? Answer: No. It may look the same, but ther is different hardware in them. It is also programmed very differently. These dongles are NOT interchangeable.
-
Question What is the difference between current Express consoles (PN 4110A100X) and Express with Emphasis facepanels (PN 4210A100X)? Answer Nothing is different except the software installed when it ships,paint color, and the addition of a 4th DMX out port. Hardware wise, these are the only things that...
-
Question: Can I buy my own PC server and just install the Emphasis software? Answer: No, an Emphasis server is shipped pre-configured from ETC with internal dongle to protect the software. We will not sell the software alone. We cannot support such installations. There are several reasons for this: New...
-
WYSIWYG Report comes with 2D systems. WYSIWYG Design comes with 3D systems. Both come with the appropriate pre-activated USB dongle and a one-year subscription. This dongle must be registered through the normal WYSIWYG registration means.
-
Symptions: If you have just reset the IP address of the server, it will not serve out IP addresses to nodes. Reboot the server and it will be fine. The problem is that ETC Net2 Services will not work properly after changing the server's IP address until it is rebooted.
-
No Response to Holding 1,2,3. Boot screen does not come up. ETC Screen does not respond. Below is information from the resolution of a case which nicely explains the problem. The Emphasis processor is not booting the console properly. IP workaround for the processor changed the ip correctly. Load 3.1...
-
If you do not have the add-on, the only thing you get is message logging (and associated pop up boxes) for critical errors only (airflow, overtemp, rack off line, etc). The add-on gets you full WYSILink functionality including access to back up looks, load reporting, about dimmer, about rack, as will...