-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
These color codes apply to Belden 9729 and MOST equivalents. These color codes do not apply to Proplex. RFU: Pin 1: Red (of the red/black pair) Pin 2: Black (of the red/black pair) Pin 3: White (of the white/black pair) Pin 4: Black (of the white/black pair) Pin 5: Power + Pin 6: Power - Link: Pin 1...
-
Pin Signal 1 ETCLink Data 2 ETCLink Data 3 N/C 4 N/C 5 Common 6 12Vdc
-
ETCLink was a wiring standard used for feedback of dimmer information to the console in ETC systems. Its use has been supplanted by the use of Ethernet networking in modern ETC consoles. When ETCLink enabled dimmers were connected to the network Net2 Nodes, visual feedback could be provided on an Emphasis...