-
To allow MIDI Show Control (MSC) to work with Cubase: In Cubase, select "Preferences." Select "MIDI Filters." Uncheck "System Exclusive" filter.
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
From our testing, Strand SN110 nodes seem to require a 6 millisecond idle time after the last stop bit. In order for ETC consoles and DMX nodes and gateways to send DMX to them you must set their DMX Output speed to "slow". A deep clear or reset will change this to "fast", so the...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-27-2009
Filed under: Congo, CongoJr, DMX, Element, Emphasis, Eos, Express, Expression, Ion, KnowledgeBase, Net2, Net3, Obsession, ObsessionII, SmartFade, SmartFadeML
-
Attached is a spreadsheet that will allow you to map out your DMX to EMDX addresses based on universe number. 3632.EDMX_Translation_Charts.xls
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-24-2009
Filed under: CEM+, Congo, CongoJr, Element, Emphasis, Eos, Ion, KnowledgeBase, Legacy Unison, ObsessionII, Sensor+, Unison
-
If there is a problem getting a Congo Client/RVI/Backup to connect to the Server, here are things to check: Is the network intact? (Ye olde “Is it plugged in, is it turned on?” question, but here specifically regarding network connections and switches…) Are the units properly IP-Addressed...
-
To make it easier and faster to solve problems with the Congo software, it is important that problems are reported in a proper and complete way. First, it is important to define what a Crash means. To a developer, a crash means that the application crashes with some kind of error message. Most crashes...
-
If you are seeing this issue, most likely the output mode switch is set to "freeze." To fix this, place the switch into the "ON" position and cycle power on the console.
-
Occasionally a Congo Console will not login to Server. You will get a Windows Visual C++ error or a Memory Exception error referencing a memory location. The application will not start if this error is presented. This error is caused because the Congo application that is attempting to load a corrupt...
-
If you want to use an X-Keys panel with a Congo console or Net3 Remote Video Interface, you will need to program your X-Keys panel to be "Memory Resident" - meaning you won't need to install or run the Macro Manager software on the piece of gear you are using. You can do this by using an...
-
I. Connecting to Your Console NOTE: If you have not already setup your console's wireless network and configured your iPhone/iPod to use that network, you need to start here: iRFR: How to Setup Your Wireless Network On your Congo or CongoJr you will need to have Remote Controls enabled. No other...