-
Generating reports with show data is very simple in Congo and comes with a few different options. Data that can be exported to the following formats includes: Exportable to PDF All Sequences & Presets Sequences Presets Groups Pallettes Device List Channel Database Channel List Output List Exportable...
-
(written by Sarah Clausen) In this short tutorial, I'll walk you through the creation of an Image Effect Playback and how to use it to create image, text and animation effects on stage. This tutorial is based on the Demo Play "Demo Tour" and its associated Training Project (Browser>Media>Training...
-
(written by Sarah Clausen) In this short tutorial, I'll walk you through the creation of a Content Effect Playback and how to get that effect running on stage. This tutorial really requires that you use the Demo Play "Demo Concert" and its associated Training Project (Browser>Media>Training...
-
(written by Sarah Clausen) In this short tutorial, I'll walk you through the creation of a new Dynamic Effect Playback and how to get that effect running on stage. I recommend using the Demo Play "Demo Concert" and its associated Training Project (Browser>Media>Training Projects)...
-
(written by Sarah Clausen) In this short tutorial, I'll walk you through the creation of a simple intensity chase effect object and then through using the new Chase Effect Playback to get that chase running on stage. You can use any play file to start with this tutorial, though I am assuming that...
-
To allow MIDI Show Control (MSC) to work with Cubase: In Cubase, select "Preferences." Select "MIDI Filters." Uncheck "System Exclusive" filter.
-
Problem: A Congo running version 5.0.x code seems much slower than the same console running version 4.3.x. This is quite visible when scrolling any long list (e.g. the Channel List). Why: This can be caused by setting the resolution of monitor 1 above the default 1024x768. Monitor 1 runs from the motherboard’s...
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
From our testing, Strand SN110 nodes seem to require a 6 millisecond idle time after the last stop bit. In order for ETC consoles and DMX nodes and gateways to send DMX to them you must set their DMX Output speed to "slow". A deep clear or reset will change this to "fast", so the...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-27-2009
Filed under: Congo, CongoJr, DMX, Element, Emphasis, Eos, Express, Expression, Ion, KnowledgeBase, Net2, Net3, Obsession, ObsessionII, SmartFade, SmartFadeML
-
Attached is a spreadsheet that will allow you to map out your DMX to EMDX addresses based on universe number. 3632.EDMX_Translation_Charts.xls
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-24-2009
Filed under: CEM+, Congo, CongoJr, Element, Emphasis, Eos, Ion, KnowledgeBase, Legacy Unison, ObsessionII, Sensor+, Unison