-
Quick Setup Easy quick way to set up the CEM3. [Quick Setup] is in the bottom left corner. Scroll down using the scroll pad until [Quick Setup] is highlighted. Push [Enter]. if Quick Setup does not appear on the front screen hit [setup] and scroll down through the menu. To select any of the words above...
-
First Time Setup (Backplane Dipswitches) Quick Setup (typically used in Touring and Portables) Change rack number Enabling/disabling data ports Enabling 16-bit fade control Changing Fan Timout Set Preset to activate on startup Allow/hide quick setup button on home page Change voltage range warnings Change...
-
CEM3 Backplanes include a dipswitch field which is set in the factory during the manufacturing process of the Sensor3 rack. There is a Dip Switch Map permanently attached on the underside of the CEM processor for easy reference. Several items are determined by the dipswitch settings on the backplane...
-
Manuals CEM3 Quick Guide v1.2.0 CEM3 is ETC's new platform for Power Control designed to reduce setup time of your dimming system, simplify system backups, and remove all barriers to networking your lighting system! Find helpful links below to increase your familiarity with CEM3 Power Control vocabulary...
-
When upgrading a single processor system to support dual processors, the order of operation is important. BEFORE REPLACING BACKPLANE: Check with ETC to determine the latest released version of CEM3 Power Control software. Verify that software has been upgraded to V1.3 or later in all processors. (Note...
-
CEM+/CEM3 The ELV module circuit must be powered (with the breaker on) before getting a control signal in order for the module to output. Why? The processor in the ELV module needs to see a zero on the pwm line before it is ready to output. With CEM+/3, test mode supplies a constant +5V signal starting...
-
-
Though ETC does not distribute any FTP file servers directly, we have prevously tested and recommended Filezilla as a server that has worked well out of the box for the purpose of file backup. Since this is 3rd party software which is updated and maintained separately, we recommend you use documentation...
-
Information from this entry has been merged into UL924 (panic look activation and setup)
-
Dimmer Property Definitions User Defined Numer (UDN): A user defined numeric identity for a circuit which is unique within a " space". Typically UDN matches circuit numbers placed at plug strip ( power distribution ) outlet locations. Name: A user defined alphanumeric identity for a circuit...