-
It is possible to deep clear the Acclaim console. Please make sure that you save your show to disk before deep clearing as it will delete all memory. To deep clear: with the console on, press [F1][F2][F3] together to enter the self test menu. Press {Select} (which is the [F1] key) repeatedly until "Clear...
-
Manuals Acclaim 100 User Manual Acclaim 300 User Manual Acclaim 100 Series Two scene preset console that provides the following features: Independent faders that control manual and timed crossfades Eight manual faders that control programmed submasters 12, 24, 36, 48 control channels (depending on model...
-
The Acclaim uses a power supply from another manufacturer, which has a wide range of AC input. There are two possible manufacturers that you will find. In early versions of the Acclaim, you will find power supplies from Computer Products Power Conversion. In the later production units of the Acclaim...
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
Problem Submasters Will Not Record on Acclaim 100 Console. The LED next to the "SUBS" button does not light up. Solution The "SUBS" button is not the top button in the set of 4--it is the second button down. The label for the "SUBS" button is between the 1st and 2nd buttons...