Response 96 Out

tomsteer — Wed, 27 Oct 2010 14:20:59 GMT

Current revision posted to ETC Product Wiki by tomsteer on 10/27/2010 9:20:59 AM

Response 96 Out

Filed under: Response

Manuals

Response 96 Out User Manual
[View:http://www.etcconnect.com/Community/cfs-file.ashx/__key/CommunityServer.Wikis.Components.Files/products/7827.Responce-96-Out-Data-Sheet.pdf:550:0]

Response 96 Out

The Response 96 Out (also known as an L86-EMDA) was a Demultiplexer unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analog. It provided 96 channels of analog output.

Data Input Selection

The type of input is defined using DIP switches inside the unit.

Mode	Switch 1	Switch 2
DMX512	Open	Open
AMX192	Open	Closed
D192	Closed	Open
K96	Closed	Closed

Addressing

The start address is set using rotary switches on the front of the unit. The switches do not correspond to DMX address but are a multiple of 6 plus 1. Outputs are always consecutively numbered. After changing the address you must reset the unit.

Analog Outputs

Outputs are 0-+10V analog only, on a set of 3 Centronics connectors. Each output can drive up to 10mA current with a maximum of 250mA for the entire board.

Connector 1
Pins 1-32 = Dimmers 1-32

Connector 2
Pins 1-32 = Dimmers 33-64

Connector 3
Pins 1-32 = Dimmers 65-96

All Connectors
Pins 33-34 = Not Connected
Pins 35-36 = Common

Knowledge Base:

[[products:Response 96 Out Quickguide|Response 96 Out Quickguide]]
[[products:KnowledgeBase: Help Your Technician Help you|Help Your Technician Help you]]

Response 96 Out

Kelsey Aleckson — Wed, 11 Aug 2010 19:51:56 GMT

Revision 14 posted to ETC Product Wiki by Kelsey Aleckson on 8/11/2010 2:51:56 PM

Response 96 Out

Filed under: Response

Manuals

Response 96 Out User Manual
[View:http://www.etcconnect.com/Community/cfs-file.ashx/__key/CommunityServer.Wikis.Components.Files/products/7827.Responce-96-Out-Data-Sheet.pdf:550:0]

Response 96 Out

The Response 96 Out was a Demultiplexer unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analog. It provided 96 channels of analog output.

Data Input Selection

The type of input is defined using DIP switches inside the unit.

Mode	Switch 1	Switch 2
DMX512	Open	Open
AMX192	Open	Closed
D192	Closed	Open
K96	Closed	Closed

Addressing

Analog Outputs

Outputs are 0-+10V analog only, on a set of 3 Centronics connectors. Each output can drive up to 10mA current with a maximum of 250mA for the entire board.

Connector 1
Pins 1-32 = Dimmers 1-32

Connector 2
Pins 1-32 = Dimmers 33-64

Connector 3
Pins 1-32 = Dimmers 65-96

All Connectors
Pins 33-34 = Not Connected
Pins 35-36 = Common

Knowledge Base:

[[products:Response 96 Out Quickguide|Response 96 Out Quickguide]]
[[products:KnowledgeBase: Help Your Technician Help you|Help Your Technician Help you]]

Response 96 Out

Kelsey Aleckson — Tue, 10 Aug 2010 13:17:22 GMT

Revision 13 posted to ETC Product Wiki by Kelsey Aleckson on 8/10/2010 8:17:22 AM

Response 96 Out

Filed under: Response

Manuals

Response 96 Out User Manual

Response 96 Out

The Response 96 Out was a Demultiplexer unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analog. It provided 96 channels of analog output.

Data Input Selection

The type of input is defined using DIP switches inside the unit.

Mode	Switch 1	Switch 2
DMX512	Open	Open
AMX192	Open	Closed
D192	Closed	Open
K96	Closed	Closed

Addressing

Analog Outputs

Outputs are 0-+10V analog only, on a set of 3 Centronics connectors. Each output can drive up to 10mA current with a maximum of 250mA for the entire board.

Connector 1
Pins 1-32 = Dimmers 1-32

Connector 2
Pins 1-32 = Dimmers 33-64

Connector 3
Pins 1-32 = Dimmers 65-96

All Connectors
Pins 33-34 = Not Connected
Pins 35-36 = Common

Knowledge Base:

[[products:Response 96 Out Quickguide|Response 96 Out Quickguide]]
[[products:KnowledgeBase: Help Your Technician Help you|Help Your Technician Help you]]

Response 96 Out

Kelsey Aleckson — Tue, 25 Aug 2009 20:56:31 GMT

Revision 12 posted to ETC Product Wiki by Kelsey Aleckson on 8/25/2009 3:56:31 PM

Response 96 Out

Filed under: Response

Manuals

Response 96 Out User Manual

Response 96 Out

The Response 96 Out was a Demultiplexer unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analog. It provided 96 channels of analog output.

Data Input Selection

The type of input is defined using DIP switches inside the unit.

Mode	Switch 1	Switch 2
DMX512	Open	Open
AMX192	Open	Closed
D192	Closed	Open
K96	Closed	Closed

Addressing

Analog Outputs

Outputs are 0-+10V analog only, on a set of 3 Centronics connectors. Each output can drive up to 10mA current with a maximum of 250mA for the entire board.

Connector 1
Pins 1-32 = Dimmers 1-32

Connector 2
Pins 1-32 = Dimmers 33-64

Connector 3
Pins 1-32 = Dimmers 65-96

All Connectors
Pins 33-34 = Not Connected
Pins 35-36 = Common

Knowledge Base:

[[products:KnowledgeBase: Help Your Technician Help you|Help Your Technician Help you]]

Response 96 Out

Kelsey Aleckson — Thu, 30 Jul 2009 15:37:35 GMT

Revision 11 posted to ETC Product Wiki by Kelsey Aleckson on 7/30/2009 10:37:35 AM

Response 96 Out

Filed under: Response

Manuals

Response 96 Out User Manual

The Response 96 Out was a Demultiplexer unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analog. It provided 96 channels of analog output.

Data Input Selection

The type of input is defined using DIP switches inside the unit.

Mode	Switch 1	Switch 2
DMX512	Open	Open
AMX192	Open	Closed
D192	Closed	Open
K96	Closed	Closed

Addressing

Analog Outputs

Outputs are 0-+10V analog only, on a set of 3 Centronics connectors. Each output can drive up to 10mA current with a maximum of 250mA for the entire board.

Connector 1
Pins 1-32 = Dimmers 1-32

Connector 2
Pins 1-32 = Dimmers 33-64

Connector 3
Pins 1-32 = Dimmers 65-96

All Connectors
Pins 33-34 = Not Connected
Pins 35-36 = Common

Manuals

Response 96 Out User Manual

Knowledge Base:
- [[products:KnowledgeBase: Help Your Technician Help you|Help Your Technician Help you]]

Response 96 Out

Kelsey Aleckson — Mon, 27 Jul 2009 21:39:00 GMT

Revision 10 posted to ETC Product Wiki by Kelsey Aleckson on 7/27/2009 4:39:00 PM

Response 96 Out

Filed under: Response

The Response 96 Out was a Demultiplexer unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analog. It provided 96 channels of analog output.

Data Input Selection

The type of input is defined using DIP switches inside the unit.

Mode	Switch 1	Switch 2
DMX512	Open	Open
AMX192	Open	Closed
D192	Closed	Open
K96	Closed	Closed

Addressing

Analog Outputs

Outputs are 0-+10V analog only, on a set of 3 Centronics connectors. Each output can drive up to 10mA current with a maximum of 250mA for the entire board.

Connector 1
Pins 1-32 = Dimmers 1-32

Connector 2
Pins 1-32 = Dimmers 33-64

Connector 3
Pins 1-32 = Dimmers 65-96

All Connectors
Pins 33-34 = Not Connected
Pins 35-36 = Common

Manuals

Response 96 Out User Manual

Knowledge Base:

[[products:KnowledgeBase: Help Your Technician Help you|Help Your Technician Help you]]

Response 96 Out

Tracy.Fitch — Sun, 12 Jul 2009 03:27:36 GMT

Revision 9 posted to ETC Product Wiki by Tracy.Fitch on 7/11/2009 10:27:36 PM

Response 96 Out

Filed under: Response

The Response 96 Out was a Demultiplexer unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analog. It provided 96 channels of analog output.

Data Input Selection

The type of input is defined using DIP switches inside the unit.

Mode	Switch 1	Switch 2
DMX512	Open	Open
AMX192	Open	Closed
D192	Closed	Open
K96	Closed	Closed

Addressing

Analog Outputs

Outputs are 0-+10V analog only, on a set of 3 Centronics connectors. Each output can drive up to 10mA current with a maximum of 250mA for the entire board.

Connector 1
Pins 1-32 = Dimmers 1-32

Connector 2
Pins 1-32 = Dimmers 33-64

Connector 3
Pins 1-32 = Dimmers 65-96

All Connectors
Pins 33-34 = Not Connected
Pins 35-36 = Common

Knowledge Base:

[[products:KnowledgeBase: Help Your Technician Help you|Help Your Technician Help you]]

Response 96 Out

Tracy.Fitch — Sun, 12 Jul 2009 03:27:36 GMT

Revision 8 posted to ETC Product Wiki by Tracy.Fitch on 7/11/2009 10:27:36 PM

Response 96 Out

The Response 96 Out was a Demultiplexer unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analog. It provided 96 channels of analog output.

Data Input Selection

The type of input is defined using DIP switches inside the unit.

Mode	Switch 1	Switch 2
DMX512	Open	Open
AMX192	Open	Closed
D192	Closed	Open
K96	Closed	Closed

Addressing

Analogue

Analog Outputs

Outputs are 0-+10V analog only, on a set of 3 Centronics connectors. Each output can drive up to 10mA current with a maximum of 250mA for the entire board.

Connector 1
Pins 1-32 = Dimmers 1-32

Connector 2
Pins 1-32 = Dimmers 33-64

Connector 3
Pins 1-32 = Dimmers 65-96

All Connectors
Pins 33-34 = Not Connected
Pins 35-36 = Common

Knowledge Base:

[[products:KnowledgeBase: Help Your Technician Help you|Help Your Technician Help you]]

Response 96 Out

Tracy.Fitch — Sun, 12 Jul 2009 03:27:36 GMT

Revision 8 posted to ETC Product Wiki by Tracy.Fitch on 7/11/2009 10:27:36 PM

Response 96 Out

The Response 96 Out was a Demultiplexer unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analog. It provided 96 channels of analog output.

Data Input Selection

The type of input is defined using DIP switches inside the unit.

Mode	Switch 1	Switch 2
DMX512	Open	Open
AMX192	Open	Closed
D192	Closed	Open
K96	Closed	Closed

Addressing

Analogue

Analog Outputs

Outputs are 0-+10V analog only, on a set of 3 Centronics connectors. Each output can drive up to 10mA current with a maximum of 250mA for the entire board.

Connector 1
Pins 1-32 = Dimmers 1-32

Connector 2
Pins 1-32 = Dimmers 33-64

Connector 3
Pins 1-32 = Dimmers 65-96

All Connectors
Pins 33-34 = Not Connected
Pins 35-36 = Common

Knowledge Base:

[[products:KnowledgeBase: Help Your Technician Help you|Help Your Technician Help you]]

Response 96 Out

Tracy.Fitch — Sun, 12 Jul 2009 02:47:01 GMT

Revision 7 posted to ETC Product Wiki by Tracy.Fitch on 7/11/2009 9:47:01 PM

Response 96 Out

The Response 96 Out was a Demux Demultiplexer unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analogueanalog. It provided 96 channels of analogue analog output.

Data Input Selection

The type of input is defined using DIP switches inside the unit.

Mode	Switch 1	Switch 2
DMX512	Open	Open
AMX192	Open	Closed
D192	Closed	Open
K96	Closed	Closed

Addressing

Analogue Outputs

Outputs are 0-+10V analogue analog only, on a set of 3 Centronics connectors. Each ouptut output can drive up to 10mA current with a maximum of 250mA for the entire board.

Connector 1
Pins 1-32 = Dimmers 1-32

Connector 2
Pins 1-32 = Dimmers 33-64

Connector 3
Pins 1-32 = Dimmers 65-96

All Connectors
Pins 33-34 = Not Connected
Pins 35-36 = Common

Knowledge Base:

[[products:KnowledgeBase: Help Your Technician Help you|Help Your Technician Help you]]

Response 96 Out

Kelsey Aleckson — Wed, 08 Jul 2009 13:50:49 GMT

Revision 6 posted to ETC Product Wiki by Kelsey Aleckson on 7/8/2009 8:50:49 AM

Response 96 Out

The Response 96 Out was a Demux unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analogue. It provided 96 channels of analogue output.

Data Input Selection

The type of input is defined using DIP switches inside the unit.

Mode	Switch 1	Switch 2
DMX512	Open	Open
AMX192	Open	Closed
D192	Closed	Open
K96	Closed	Closed

Addressing

Analogue Outputs

Outputs are 0-+10V analogue only, on a set of 3 Centronics connectors. Each ouptut can drive up to 10mA current with a maximum of 250mA for the entire board.

Connector 1
Pins 1-32 = Dimmers 1-32

Connector 2
Pins 1-32 = Dimmers 33-64

Connector 3
Pins 1-32 = Dimmers 65-96

All Connectors
Pins 33-34 = Not Connected
Pins 35-36 = Common

Knowledge Base:

[[products:KnowledgeBase: Help Your Technician Help you|Help Your Technician Help you]]

Response 96 Out

tomsteer — Fri, 26 Jun 2009 17:00:24 GMT

Revision 5 posted to ETC Product Wiki by tomsteer on 6/26/2009 12:00:24 PM

Response 96 Out

The Response 96 Out was a Demux unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analogue. It provided 96 channels of analogue output.

Data Input Selection

The type of input is defined using DIP switches inside the unit.

Mode	Switch 1	Switch 2
DMX512	Open	Open
AMX192	Open	Closed
D192	Closed	Open
K96	Closed	Closed

Addressing

Analogue Outputs

Outputs are 0-+10V analogue only, on a set of 3 Centronics connectors. Each ouptut can drive up to 10mA current with a maximum of 250mA for the entire board.

Connector 1
Pins 1-32 = Dimmers 1-32

Connector 2
Pins 1-32 = Dimmers 33-64

Connector 3
Pins 1-32 = Dimmers 65-96

All Connectors
Pins 33-34 = Not Connected
Pins 35-36 = Common

Response 96 Out

tomsteer — Fri, 26 Jun 2009 15:30:22 GMT

Revision 4 posted to ETC Product Wiki by tomsteer on 6/26/2009 10:30:22 AM

Response 96 Out

The Response 96 Out was a Demux unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analogue. It provided 96 channels of analogue output.

Data Input Selection

The type of input is defined using DIP switches inside the unit.

Mode	Switch 1	Switch 2
DMX512	Open	Open
AMX192	Open	Closed
D192	Closed	Open
K96	Closed	Closed

Addressing

Analogue Outputs

Outputs are 0-+10V analogue only, on a set of 3 Centronics connectors. Each ouptut can drive up to 10mA current with a maximum of 250mA for the entire board.

Connector 1
Pins 1-32 = Dimmers 1-32

Connector 2
Pins 1-32 = Dimmers 33-64

Connector 3
Pins 1-32 = Dimmers 65-96

All Connectors
Pins 33-34 = Not Connected
Pins 35-36 = Common

Response 96 Out

tomsteer — Fri, 26 Jun 2009 15:23:22 GMT

Revision 3 posted to ETC Product Wiki by tomsteer on 6/26/2009 10:23:22 AM

Response 96 Out

The Response 96 Out Product Pagewas a Demux unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analogue. It provided 96 channels of analogue output.

Data Input Selection

The type of input is defined using DIP switches inside the unit.

Mode	Switch 1	Switch 2
DMX512	Open	Open
AMX192	Open	Closed
D192	Closed	Open
K96	Closed	Closed

Addressing

The start address is set using rotary switches on the front of the unit. The switches do not correspond to DMX address but are a multiple of 6. Outputs are always consecutively numbered. After changing the address you must reset the unit.

Analogue Outputs

Outputs are 0-+10V analogue only, on a set of 3 Centronics connectors. Each ouptut can drive up to 10mA current with a maximum of 250mA for the entire board.

Response 96 Out

Tracy.Fitch — Thu, 18 Jun 2009 18:39:30 GMT

Revision 2 posted to ETC Product Wiki by Tracy.Fitch on 6/18/2009 1:39:30 PM

ETC Response 96 Out

Response 96 Out Product Page

ETC Response 96 Out

Kelsey Aleckson — Mon, 15 Jun 2009 19:57:11 GMT

Revision 1 posted to ETC Product Wiki by Kelsey Aleckson on 6/15/2009 2:57:11 PM

Response 96 Out Product Page