|
Response 96 Out
|
|
|
|
|
The Response 96 Out was a Demultiplexer unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analog. It provided 96 channels of analog output.
Data Input Selection
The type of input is defined using DIP switches inside the unit.
| Mode |
Switch 1 |
Switch 2 |
| DMX512 |
Open |
Open |
| AMX192 |
Open |
Closed |
| D192 |
Closed |
Open |
| K96 |
Closed |
Closed |
Addressing
The start address is set using rotary switches on the front of the unit. The switches do not correspond to DMX address but are a multiple of 6 plus 1. Outputs are always consecutively numbered. After changing the address you must reset the unit.
Analog Outputs
Outputs are 0-+10V analog only, on a set of 3 Centronics connectors. Each output can drive up to 10mA current with a maximum of 250mA for the entire board.
Connector 1
Pins 1-32 = Dimmers 1-32
Connector 2
Pins 1-32 = Dimmers 33-64
Connector 3
Pins 1-32 = Dimmers 65-96
All Connectors
Pins 33-34 = Not Connected
Pins 35-36 = Common
Knowledge Base: