Electronic Theatre Controls
Welcome to ETC's Online Community

Reflection: How to set up slave unit

Reflection: How to set up slave unit This page is locked to prevent further edits

Filed under:

Reflection unit.

Question:

How to slave two unit together

Answer:

  • Remove Jumpers on the right of the large ribbon cable. Labeled LK2 and LK3
  • Add jumper at "C" to the left of the large ribbon cable, Remove at "D"
  • Use a Straight Serial cable, using Pins 1-3 only.
  • Cable to be no longer than 8 feet. The shorter the better
  • Software in both units must be 2.07 at IC5
    Cable Pin out is:
    1 = Common
    2 = DATA
    3 = CLOCK
  • Must set a unique ID number for each unit
  • Slave face panel becomes inactive

Recent Comments

Leave the first comment for this page.
Powered by Community Server (Commercial Edition), by Telligent Systems