KnowledgeBase: Setting the Console Mode on an Analog Address System

You will need to locate the Analog address processor unit and remove the right
panel.  Once the panel is removed you will find the processor keypad.

Selecting console pile-on or disable mode:
If you have a lighting control console wired into the Analog Address system, you can choose whether or not the console can control dimmers included in analog channels.  Two console control options are available: pile-on and disable. If you select pile-on, the console is able to control all dimmers included in Analog Address channels; the
highest setting between the console and Analog Address establishes active levels. If you select disable, the console is not able to control any dimmers included in analog or panic channels; the console can still control dimmers included in only the work light channel. In disable mode, console controls all dimmers not included in Analog Address analog or panic channels.

1. Press [Exit] to display menu.
2. Scroll through menu options on LCD using Dimmer [Up] and [Down] until Console appears.
3. Press [Enter] to display the Console mode screen (see illustration).
4. Press Edit [Up] and [Down] to select pile-on or disable.
5. Press [Exit] to save selection and return to menu.