Electronic Theatre Controls
Welcome to ETC's Online Community

KnowledgeBase: L86 Dimmer Module Choke Retainer Versions

Page Details

First published by:
Kelsey Aleckson
on 07-01-2009
Last revision by:
Kelsey Aleckson
on 07-10-2009
This page has not yet been rated

KnowledgeBase: L86 Dimmer Module Choke Retainer Versions This page is locked to prevent further edits

Filed under: ,

On L86 dimmer modules, there are two versions of the torroid holder.

  • The old style is a "X" shape (ETC P/N 1086A3040).
  • The new style is a "flat bar" shape (ETC P/N  7050A4024), which is the same as the Sensor modules.

These two types are not interchangeable;  the length of the bolt that the choke mounts around is different.It is extremely difficult to tell the difference by physically looking at it. 
ETC recommends that you replace the retainer with the same style.

Recent Comments

Leave the first comment for this page.
Powered by Community Server (Commercial Edition), by Telligent Systems