Electronic Theatre Controls
Welcome to ETC's Online Community

KnowledgeBase: How do I set a dimmer to be "always on" in Sensor (classic) 2.14 software?

Table of Contents

Page Details

Published by:
Tracy.Fitch
on 10-02-2009
This page has not yet been rated

KnowledgeBase: How do I set a dimmer to be "always on" in Sensor (classic) 2.14 software? This page is locked to prevent further edits

Filed under: , ,

Sensor CEM version 2 code does not have an "always on" firing mode but we can set a dimmer that way.

To set a dimmer to be always on:

  1. Press [Setup]
  2. Press [1] for Dimmer
  3. Type the dimmer number on the numeric keypad and press [Enter]
  4. Press [4] to select Switched firing mode and press [Enter]
  5. Press [right arrow] to move to the next screen.
  6. Press [Enter] to move cursor to bottom line
  7. Type [0] for Level and press [Enter] (the display will change to say "1" -- this is expected)
  8. If the signal light on the dimmer module does not come on immediately, you may need to repeat steps 6 & 7 once more
  9. [Exit] back out to the normal display

 

Recent Comments

Leave the first comment for this page.
Powered by Community Server (Commercial Edition), by Telligent Systems