KnowledgeBase: Generating Defaults on the CEM+ (Full Featured)

*Menu structure is based on software v2.1.7
*If your rack does not have a configuration in it already, skip to step 6.

1. Scroll to [Login]
2. Enter the password 3,3,3,3 (scroll up to 3 and hit checkmark, etc.)
3. Scroll to [Rack] and hit the checkmark
4. Scroll to [Delete All Racks] and hit the checkmark
5. It will say Save Changes? Change it to [Yes] and hit the checkmark
6. After reboot it should display [Generate Defaults], hit the checkmark
7. It will say [Full Feature], hit the checkmark
8. It will ask you to select Group Number. Scroll to correct group number and hit checkmark
9. It will ask you the number of racks to add. Scroll to correct number and hit the checkmark
10. It will ask for input voltage. It will be set to 120V in the US. Hit the checkmark
11. It will ask you for the Rack Type. Scroll to the correct type and hit the checkmark
    1. SP/ESP/HSP racks are for portable and touring racks. SR/ESR/HSR racks are for install racks
    2. The number of the rack refers to the number of module slots in the rack NOT circuits. (e.g. If you have a portable rack that can hold 24 D20 modules in it for a total of 48 circuits, you have an SP24 rack.)
12. It will ask you to set the First Dimmer. Scroll to the correct value and hit the checkmark.
    Note: This is NOT the DMX address. This is the number of the first dimmer in this rack as it pertains to the group.
13. It will ask you to set the Start Address for DMX Port A. Scroll to the desired value and hit the checkmark.
14. It will ask you to set the Temp Alarm. It will be set to [104]. Hit the checkmark
15. It will ask you for the Module Type. Select the correct value and hit the checkmark. You can only select one type at this point.
16. It will ask you to Set Phase Balance. You can choose between Balanced and Straight both in 3Phase and 1Phase. Note: All SP racks will be Straight. 
17. It will ask you to set Advanced Features [On] or [Off]. Make a selection and hit the checkmark
18. It will ask you to Save Changes. Select [Yes] and hit the checkmark.

It will reboot and take you to the home screen.