Electronic Theatre Controls
Welcome to ETC's Online Community

Eos Configuration of External Monitors Before v.1.9.5

Attachments

Table of Contents

Page Details

First published by:
Hans.Hinrichsen
on 09-09-2011
Last revision by:
Hans.Hinrichsen
on 04-27-2012
This page has not yet been rated

Eos Configuration of External Monitors Before v.1.9.5

Filed under: , [Edit Tags]

To configure external monitors on an Eos console running a version before v1.9.5:

  • The configuration of the external monitors is done in the EOS Configuration Utility (the ECU, otherwise known as the Shell)
    • To access the shell, press the Displays key, and select {Exit Eos} from the menu
    • Press {Ok}
    • After a few seconds, the {Settings} button will light up in yellow. Click on it, and go to the General tab
    • Select {External Monitor Arrangement}
  • In the ECU it is possible to configure the logical monitor placement to match the physical monitors

  

We have not had any issues with our monitor configurations in the testing that we've done in-house.  Our (Test's) preferred method of connecting / disconnecting monitors is:

                Power down Eos

                Disconnect / reconnect monitors

                Power up Eos

                Arrange monitors via ECU

 

If you do experience difficulty in arranging monitors, consider upgrading the console's software if possible.  The external monitor arrangement tool changed in version 1.9.5 and higher, and this may resolve the configuration issues.  Please see this wiki article for more information on updating software: KnowledgeBase: Updating Eos / Ion / Element Software

Recent Comments

Leave the first comment for this page.
Powered by Community Server (Commercial Edition), by Telligent Systems