The B96M (male) connector interface module provides an interface between ten-pin female Cinch-Jones connectors and male Centronics-type (aka Champ) connectors. The B96F (female) module provides an interface between male ten-pin Cinch-Jones connectors and female Centronics-type connectors.
Physical
|
|
|
|
B96F is used with 96 In
Contains:
- 3 female Centronics-type
- 16 male Cinch-Jones
|
B96M is used with 96 Out, (A)32 Out, 512 Out
Contains:
- 3 male Centronics-type
- 16 female Cinch-Jones
|
The B96M or B96 F is fabricated of .100 aluminum and are equipped with integral carry handles and brass cable tie bars. The dimensions are 13.25" W x 2.5" H x 8.0" D. All metal parts are finished with baked, textured, black enamel. Labeling is reverse silk screened in yellow on black.
Each Centronics-type connector is 36-pin wired to accommodate 32 dimmers. Pins 1 through 32 on Centronics-type connector rumber one carry signals for circuits 1 through 32 (Connectors two and three carry signal for circuits 33 through 64 and 65 through 96 respectively). Pins 35 and 36 are ground on all three.
Each Cinch-Jones connector is 10-pin wired to accommodate six dimmers. Pins 1 through 6 carry control signal. Pin 8 is ground. Pins 7, 9 and 10 are not used. In analog systems, consoles have female Cinch-Jones and dimmers have male Cinch-Jones.