Electronic Theatre Controls
Welcome to ETC's Online Community

Wikis

Browse Wikis

Not rated

Express LittleLite pinouts This page is locked to prevent further edits

The 3-Pin XLR is wired like this: 1 - Chassis Ground 2 - Common Dim Leg 3 - +12 volt Connect lamp between pins...
Revision #1 Posted to ETC Product Wiki by Kelsey Aleckson on 07-12-2010
Not rated

Express Console Remote Macros This page is locked to prevent further edits

The Express Console and Express LPC's provide four remote macro inputs through the 15-pin connector on the...
Revision #1 Posted to ETC Product Wiki by Kelsey Aleckson on 07-12-2010
Not rated

Dimmer doubling and ML patching This page is locked to prevent further edits

Question: Can you patch a moving light onto a dimmer doubled port? Answer: If the port has been set to dimmer doubled...
Revision #1 Posted to ETC Product Wiki by Kelsey Aleckson on 07-09-2010
Not rated

Emphasis Server System Installation

Question: If I reinstall my system from the System Install disks, do I need to remove the internal dongle? Answer...
Revision #1 Posted to ETC Product Wiki by Kelsey Aleckson on 07-08-2010
Not rated

Emphasis vs. WYSIWYG USB Dongle

Question: Is the internal Emphasis USB dongle the same as the WYSIWYG boxed product USB dongle that comes with...
Revision #1 Posted to ETC Product Wiki by Kelsey Aleckson on 07-08-2010
« First ... < Previous 40 41 42 43 44 Next > ... Last »
Powered by Community Server (Commercial Edition), by Telligent Systems