Showing related tags and posts across the entire site.
-
The amount of heat generated by a phase control dimmer is determined in part by the load applied. Maximums based on the full rated load of a pack: per dimmer per dimmer pack 12 channel, 20 amp 30W/103BTUs 360W/1230BTUs 24 channel, 10 amp 60W/205BTUs 360W/1230BTUs Combined for a 4 pack touring rack, Maximum...
-
Both Portable and Wall Mount SmartPacks easily switch from single phase to three phase operation, or vice-versa, by moving the power feed wires from the L2 terminal in the pack to the L1 and L3 lugs on the power board. Each SmartPack ships with a document including illustrations for this purpose. A quick...
-
Quick Summary: If you've got devices with electronics inside being powered from a dimmer in a sensor rack, set the firing mode to switched . If you're on a Unison rack, a SmartPack, a SmartBar, or a SmartModule, set the mode to non-dim What those options mean: Non-dim dimmers output regulated...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on 07-24-2009
Filed under: Dimmer, KnowledgeBase, Legacy Unison, Sensor, SmartBar, SmartModule, SmartPack, Unison
-
The Amperes of In-rush Current rating for the pack is 10,000 for United States domestic units and 6,000 for European CE units.