Showing related tags and posts across the entire site.
-
I. Network Configuration The iRFR requires that your console be on a wireless network. Below are a couple examples of how you may choose to configure your wireless network: *NOTE: Your lighting network should never have a direct connection to the internet. It is also critical that the wireless component...
Posted to
ETC Product Wiki
by
jmusarra
on 09-02-2009
Filed under: iphone, ipod, iRFR, remote control, RFR, RFU, wireless, WRFU
-
I. Connecting to Your Console NOTE: If you have not already setup your console's wireless network and configured your iPhone/iPod to use that network, you need to start here: iRFR: How to Setup Your Wireless Network 1. On your console, you will need to enable iRFR support (which if off by default...
Posted to
ETC Product Wiki
by
okrogell
on 07-04-2009
Filed under: iphone, ipod, iRFR, remote control, RFR, RFU, wireless, WRFU
-
I. Connecting to Your Console NOTE: If you have not already setup your console's wireless network and configured your iPhone/iPod to use that network, you need to start here: iRFR: How to Setup Your Wireless Network On your Congo or CongoJr you will need to have Remote Controls enabled. No other...
Posted to
ETC Product Wiki
by
okrogell
on 07-04-2009
Filed under: Congo, CongoJr, iphone, ipod, iRFR, remote control, RFR, RFU, wireless, WRFU
-
RFR with Congo/CongoJr Also see: Getting Started with Congo/CongoJr The iRFR has the same functionality as the Net3 RFR. The RFR works within its own field and this field can be cleared from the console. All channel intensity levels generated by the remote can only be recorded into targets from the remote...
Posted to
ETC Product Wiki
by
okrogell
on 07-04-2009
Filed under: Congo, CongoJr, iphone, ipod, iRFR, remote control, RFR, RFU, wireless, WRFU