Showing related tags and posts across the entire site.
-
Rise-time: Facts and Myths By Adam Bennette of ETC Europe Ltd There as a new buzzword in our midst: rise-time (RT), but what exactly is it and how much of it is a good thing? To put it simply it is an attempt to measure the noise produced by a dimmer but with very varied results. Equipment purchasers...
-
Risetime and Lamp Noise - What's the Connection? Everyone agrees that while a certain amount of dimmer noise at the rack is OK, noise at the lighting fixture is unacceptable. The popular wisdom is that the only way to prevent this dimmer–induced lamp noise is to specify high risetime dimmers...
-
Question: Can you patch a moving light onto a dimmer doubled port? Answer: If the port has been set to dimmer doubled in setup then the console will not allow you to patch a moving light to that port. The light needs to be patch to a different port or universe of DMX
-
Manuals SD Individual Dimmer Datasheet SD Single Dimmer There are a couple of styles of SD12000 dimmers. The "old" style used two cubes mounted to the heat sink. We no longer have any of these old cubes, nor can we get any more. If you requesting new power cubes for your SD-12000 dimmer, you...