-
Old yes, but you are the only one to respond. So thanks just for that! I was beginning to wonder if I was the only one these days to use paper. I think the PC software now does a lot of what you are talking about. My main needs are not for the stack. I consult with play-by-ear groups like churches, that...
-
After upgrading to the latest firmware 2.0.0.9.0.23 the bump buttons for memories that do not have anything store have a slight red glow to them. Also the memory bump button 37-44 (85-92) that do not have anything store have a slight green/yellow glow to them. They look sort of like the sequence bump...
-
I have three questions regarding the Smartfade 2496 and Smartsoft on the Mac (both v. 2.0): 1. If I save a look to memory 45, then save a sequence to that same bump (sequence 1), have I just overwritten that memory? What will come up of that memory is referenced by a step in the stack? I haven't...
-
The SF/SFML "GO" button is mapped to Program Change #125. So you can take a Footswitch-to-MIDI converter and program it to send a prog change #125 event on contact closure. Example for a professional MIDI converter: MIDI Solutions F8 http://www.midisolutions.com/prodf8.htm
-
Can you link cues in the stack on a Smartfade 2496 to get a constant looping effect? I know you can jump to whichever step you like, and I know you can assign unique fade up, fade down, & wait times but I don't see anything in the instructions that would allow me to endlessly loop just a few...
-
Hello I'm using a SmartFade1248(V2.0) I sent some MSC messages from SmartFade(STACK) to midi softwear(PC) It received correct messages(MSC & midi program change) without a problem received contents are C0 7D 00(midi program change) F0 7F 7F 02 01 31 2E 30 F7(MSC) Then I tried to send a message...
-
Hi Charity, Could you call ETC Technical Support at 1-800-688-4116? Just ask the person who answers the phone for technical support. We're here from 8AM till 5PM US central time. One of the techs can help you trouble shoot your system. Thanks. Durrell Ramer ETC Quotations and Customer Services Manager
-
Has anyone created some paper/notes layouts for basic SF consoles? (ML is just another world.) Before I make my own, I thought someone might have at least gotten started. What I am looking for is a format for noting what the various sliders and mems are doing to aid an operator during an unscripted event...
-
I have a qustion regarding recording to the Stack on a SmartFade 2496. Is it possible to record sets of memories or more than one board channel at a time to a step? I'm in need of recording in a similar fashion to a full light board where I can customize each cue with different levels, but I can not...
-
Hallo, ist es vielleicht Möglich in Zukunft, mehr als einen Kreis auf die Indipendents mit Intensitäten zu pachen, zum Beispiel für unser Foyer oder Putzlicht? Das wäre echt toll, wenn man dazu die Möglichkeit hätte. Außerdem eine Non Dim Einstellung wäre auch...