Electronic Theatre Controls
Welcome to ETC's Online Community
All Tags » scroller (RSS)

Browse Forum Posts by Tags

Showing related tags and posts for the Forums application. See all tags in the site
  • Re: Old Revolution, New Scroller

    Hello Jeff, I’m guessing that you want to know about upgrading to the version with the Wybron scroller on the front. There is an upgrade kit that can be purchased from ETC. I do not have the part number handy as I’m at home but Technical Service in the US should be able to get you the number...
    Posted to Source Four and Revolution (Forum) by mmeskill on 02-14-2009
    Filed under: Wybron, Revolution, Scroller
  • Scrollers and Submasters; a problem?

    Hi everyone, So I want to put submasters for the area lights on stage. Channels 1, 21 and 41 into sub 1. I record this and everything is fine. The problem is when I introduce my scrollers on channels 61-69 then use my submasters, the color data is getting into the sub and the scrollers change color....
    Posted to The Eos (and Ion) Forum (Forum) by GAC TheaterDance on 02-13-2009
    Filed under: scroller, ION, scrollers, submaster, automark
  • Re: Roboscans and Scrollers

    Brian, Thanks for your help. I have set up the Chroma Q's like you suggested in the first part of your post. That works great. After that, I tried to make a custom color wheel and got a little bit lost. What I did was copy the "scroller" profile and then went in to edit it. From there I...
    Posted to The Eos (and Ion) Forum (Forum) by clswenson on 12-30-2008
    Filed under: scroller, Chroma Q scrollers
  • Roboscans and Scrollers

    I am very new to the ION console after many years of programming and operating an Express 48/96. Our theater actually bought the ION a few months ago, but after hooking it up and trying to get started, we ended up plugging the Express back in - as the task of learning the new board seemed too daunting...
    Posted to The Eos (and Ion) Forum (Forum) by clswenson on 12-26-2008
    Filed under: scroller, Chroma Q scrollers
  • Merging Expression Cues; Scrollers; and Movers

    First of all, I would like to thank everyone who is active on this forum for the amount of help they have given all of us who are making the jump to the EOS and ION. I have just a few questions that I have not yet had answered by browsing the forums. 1. I am a student at Michigan State University. This...
    Posted to The Eos (and Ion) Forum (Forum) by pjveltri on 12-10-2008
    Filed under: scroller, Ion Review, ION, Ion Console, training, Ion Cuelist Playback, scrollers, Calibrate, Color Source, Expression, Import Cues ION
  • Scrollers not automarking

    I have several Forerunners patched in my current show. I also have 4 Studio Spot 250s and 4 Tracjspots. I decided to activate the Automark function since doing all the marking myself seemed rather daunting and I had a short rehearsal/cueing time. The problem I have is the Forunnerss to not automark....
    Posted to The Eos (and Ion) Forum (Forum) by SBC on 07-10-2008
    Filed under: scroller, ION
  • Re: Coloram scroller with fan control channel

    Josh- Thank you for your reply. Unfortunately I have an older software version in my CRII brains and do not have the options for fan control. Also, I spoke with Wybron specifically about this and was told that the "block" function does assign a DMX address for fan control to each scroller, but it does...
    Posted to The Eos (and Ion) Forum (Forum) by ctoddbrown on 04-25-2008
    Filed under: EOS, scroller, ION
  • Fixture editing advice needed

    I am trying to build a fixture for AC Lighting Chroma-Q Plus scrollers, similar to the Scroller_and_Dimmer fixture, but with a second attribute per scroller for control signals (fan speed, gel saver, etc.) I tried building a fixture using 3 attributes (Scroller_2, Scroller_Fan_Speed, and Intensity),...
    Posted to The Eos (and Ion) Forum (Forum) by sk8rs_dad on 03-18-2008
    Filed under: scroller, ION
  • Re: Scroller Madness

    Hi Brian As far as I'm aware, you can't re-name the labels that appear in the encoder, although I agree it would be nice to have the option of displaying the colour number. I don't know of any quick way of inverting a scroller (eg profile/curve). From what I can gather it is only possible to add curves...
    Posted to The Eos (and Ion) Forum (Forum) by BrentFJ on 02-06-2008
    Filed under: EOS, scroller
  • Re: Eos Fun Facts

    And David.... once you are in that list view.... an edit key makes it possible to go directly to blind of the selected record target. Also..... Has everyone discovered the live scroller calibration tool in 1.3? Select a channel with a color scroller. Toggle the scroller encoder. Notice a key that says...
    Posted to The Eos (and Ion) Forum (Forum) by Anne Valentino on 12-19-2007
    Filed under: EOS, scroller
Page 1 of 3 (23 items) 1 2 3 Next >
Powered by Community Server (Commercial Edition), by Telligent Systems