-
Hey guys, I'm running my laptop down on stage as the RVI with the dongle in place [because I don't have a crew to setup the real RVI all the time]. And I know all the keys that correspond to the keyboard, but I wanted to keep the virtual keypad in the CIA, or in a designated part of the screen...
-
This is just a friendly reminder so others don't get caught like I did. . . the designer does some programming in the house using the RVI. I'm not at the console for some of this time. The inputting of cues is rather haphazard, for various reasons: not starting at one and going to the end, but...
-
Hi All. I finished the Opera with the I-Cue, hazer, et al, and thanks to those that answered my questions about DMX toys. It all went pretty well, for the most part. This was our first chance to use the RVI as a designer's remote in the house. The designer did some progamming from it (when the SM...
-
I have a show coming in that wants to use two programmers, one for conventionals and one for moving lights. I know that this can be done with partitioned control on the EOS, but I need to make sure that a client or RVI can be used for the second programmer. I would try this out but I can't reconfigure...
-
Forgive me if I missed this in my search of the forum, but I can't find a way to calibrate a touchscreen from the Net3 RVI. I've hooked up the same model screen to both my Eos and Ion consoles and I can calibrate it from the General tab in the shell, but that option doesn't seem to be available on the...
-
Hi all: I'm testing my RVI and discovered that I can't get some of the Shortcut keys to work on the QWERTY. The Ion (1.4.2) is master User #1, the RVI (1.4.2) is client User #2. Yes, Scroll Lock is ON. Alt Z doesn't work. (goto cue 0). Shift G 0 Enter works fine. The Alt works, and the Z works, just...
-
I know this has been covered recently, but I'm scratching my head. I just received the replacment RVI (serial number ending 0007). 1 VGA monitor (call it A) plugged into DVI-1 works fine. Monitor A doesn't work with the VGA connector on the back of the RVI. VGA Monitor B will work as DVI-1 in place of...
-
we have been using our rvi as a tech table for the designer. The problem is, when in client function, with the board (ION) as a master, the screens to not follow along with what the person on the board is typing. And when the designer is scrolling, with lots of frustrated sighs, through the channels...
-
This seems like a simple question, and I haven't combed the archives of threads yet, but I'm running an Ion RVI with two VGA monitors- How do I get the cue list on one monitor (with the CPA) and the channel list on the other? I have the hard tab button on the front, but I'd like to be able to set it...
-
The cart is from: http://www.anthro.com/ppage.aspx?pmid=66 Add RVI, Monitors, and Xkeys and you're good to go... Props to Mike McBride & Tim Young - the masterminds of this conglomeration of precision equipment.