-
More info would help. How is your ETCnet setup? Are you using net2 nodes? My theater is all ETCnet with net2 nodes and my scrollers work fine. One thing I have noticed is that if I plug the ethernet cable into the board after I have turned the board on, I have to exit the Ion or reboot to get it to talk...
-
Internet access is different than having access to the router or switch via TCP/IP. Just because you have to use a browser to set settings on your router doesn't mean that it has to have internet access. You would set up a closed network for your space. It could only consist of the console and the...
-
Hello once more, Long story short, I am looking to provide an LD with a selected/active channels display so that he can easily view what is going on without having to lean over my shoulder when he says " can I see what Ch20 is at?" or suchlike. To avoid using my own screen space, one solution...
-
Heya there, i am a little lost... i have been using the ion (v.1.4.2.9.0.42) to connect to a XP PC running wysiwyg r22 and everything was going well. Now i have been trying to connect the same console to a pc running vista and wyg. The IP settings on the pc are the same as on the old XP. The console...
-
I have 2 studios with one ION each on one dimming network via ethernet (sensor+ with CEM-Module). Also a small set with an ELC DMX-Recorder using a NET3 Gateway accessing these dimmer-network. The ION's has to back up each other, but I can't find a proper way. As Master/Client the lights are going off...
-
Got a question for everyone! I have a new studio (connected to the larger performing arts center main stage) which will be online soon. This new studio has an Ion console and the full net3 infrastructure (minus the remote processing unit). We have just started the process of upgrading our main space...
-
Hello All, I recieved my client dongle in the mail today and went to try it out. But come to find out after a call to tech support that there needs to be, (what I think is), pretty substantial changes to the Network settings for my laptop. I was thinking and hoping that the process would be a little...
-
Ok I agree the security and resource risks are a good enough reason not to have internet access but there are two network opitons I want. 1. The ability over the network to check and change the dimmers. Currently I had to scrounge up an old pc it would be much more efficiant to have them on one machine...
-
Coming up in September, we're going to be doing a show in a new theatre that just received an Eos system and Net3 system to run pretty much the whole building, but the Eos mainly just the main stage, and an architecture system runs the hallways, etc. I'm planning on bringing our Ion in for this...
-
Howdy Brian, New RFR Firmware for networked operation of the RFR has not yet been released. I am not sure of its release - but its being worked on currently. Have fun with the rest of the V1.4.3 features!