Electronic Theatre Controls
Welcome to ETC's Online Community
All Tags » etc (RSS)

Browse Forum Posts by Tags

Showing related tags and posts for the Forums application. See all tags in the site
  • Arcing base on Revolutions

    I have recently been dealing with a really annoying arcing issue between my lamp base and my fixture bases in my revolutions. In the last month I have gone through half a dozen new fixture bases, and the problem continues. I am perpelexed as to the cause of this, havent really changed anything in the...
    Posted to Source Four and Revolution (Forum) by khillstrom on 07-09-2009
    Filed under: ETC, Revoution, Lamp base
  • Any ideas for this?

    So. We have one sensor rack (has ethernet plug on front, DMX cable /input isn't accessable at all) We have a ETC Express 24/48 connected to it (has universe 2 still free along with free ethernet plugin) the board is in the booth... far away from the rack fyi). For a upcoming show we would like to...
    Posted to Networking Discussions (Forum) by John on 03-10-2009
    Filed under: net3, brand, computer, DMX, gel changers, USB, ethernet, etc, ideas, express, moving gobo
  • Adding channels

    We have a Express 24/48 with 48 channels this seems to the maximum channels we can put on it though is there a way to make it have more channels. I have been told there's some hardware or something we have that can do it. I know the way to add them in the setup and stuff however I try to go to say 50...
    Posted to Express/Expression/Emphasis and Obsession (Forum) by John on 11-24-2008
    Filed under: etc, express 24/48
  • Source 4 Maintenance Schedule.

    So I work at an outdoor theater in southern california. I have come to the end of what I can deal with fixing our old fixtures and have gotten preliminary approval to purchase about 18 S4 next before the next summer season. With additional purchases being made in the future. My question is this... Since...
    Posted to Source Four and Revolution (Forum) by rhdgs on 08-07-2009
    Filed under: Source 4, ETC, Lamp base, Outdoor
  • ETC ION 'Lamp On' Issue

    The "LAMP ON" command for the SGM Giotto Spot & Wash 400 is not functioning properly on Ion 1.7 It strikes the lamp momentarily, but after a few seconds the lamp turns off. Repeated attempts turn out the same result. I'm accessing the command by selecting the fixtures, using "ABOUT"...
    Posted to The Eos (and Ion) Forum (Forum) by smrsunboy on 09-15-2009
    Filed under: ION, SGM, ETC, Lamp on
  • Re: Need help replacing reflector

    I followed the instructions in the S4_Assembly_Guide pdf on the etc web site, but with a twist. Instead of the 'drop & pop' idea mentioned, I used a drill press & 8 saws-all blades. >I took a piece of high density foam & put it on the bed of the drill press, & cut a chunk the...
    Posted to Source Four and Revolution (Forum) by aleproco on 05-19-2010
    Filed under: Source 4, ETC, Lamp base, reflector, sf reflector removal
  • Multiple commands in one line?

    Can anyone tell me if it's possible to do multiple commands at the same time in the command line? eg. Group 1 Focus Palette 20 and Group 2 Color Palette 10. I could do this with presets, but I would need to set up too many to make it worth while. Thanks!
    Posted to The Eos (and Ion) Forum (Forum) by LX23 on 12-11-2010
    Filed under: EOS, ION, Ion Console, command line, ETC, select, ION ?, Palettes, ETC Ion
  • Ion and 4 S4 Revolutions

    Hi I am helping a friend out with a show. The console is an Ion and we have 4 S4 Revs. I have never worked on this console until yesterday so trying to learn fast but we also only have about 2 days to finish programming the whole concert. My problem is getting the accessories to work with the Revs. I...
    Posted to The Eos (and Ion) Forum (Forum) by mpm174 on 01-27-2011
    Filed under: Revolution, ETC, ETC Ion
  • Setting up Ion Network Help - Client Software - Do I need a Dongle?

    So I have purchased 3 wnr-2000 v2 and have plugged one into the etcnet port. I have setup a wireless WPA-PSK2 passkey and on the board I enabled rfr wireless. I'm trying to use arfr (sadly it expired before I even got to use it, but will purchase when I know that I have everything setup) and the...
    Posted to The Eos (Gio and Ion) Forum (Forum) by APhamX on 03-17-2012
    Filed under: network, ION, ETC, client Software, OSX, windows 7, setup, help
  • Becoming a beta tester

    I'm new to this forum and mentioned to Lowell at the ETC booth at cinegear about beta testing. I'm a student at CSUF and work on the ion. I'm interested in becoming a beta tester but not sure what I have to do. I'm interest in the GIO. There are some features on the GIO I like but feel...
    Posted to The Eos (Gio and Ion) Forum (Forum) by lrinker on 06-10-2012
    Filed under: ETC, ETC Ion, beta, gio
Page 1 of 3 (26 items) 1 2 3 Next >
Powered by Community Server (Commercial Edition), by Telligent Systems