-
In regards to the chasing seq, the second way is the easiest. you can assign times to any chase. If you then set BPM the desk simply ignores the times and snaps through the cues. As far as I remember your first way should also work, but I remember some strange behavior. I think you might have to run...
-
Dave: On a different note .. I used WFA for the first time last night .. I discovered I needed to set the sequence to "Chase" to make it work .. I did not find this documented in the manual .. Hi Dave, What times are you using [wait] or [follow on]? If you use [Wait], you have to assign the time to the...
-
Yes indeed it is! Two methods: Use the {Ch Delay} softkey under {Times...} # [Ch]&[Delay] shortcut These shortcuts use your "Set Times To" A/B option to determine the sequence step they apply to. To set these: Select the relevant channels by any method. Type the number of seconds to delay...
-
No need to print it out if you have 2-3 screen I usually open help screen, (press ?) which has a up to date manual on the desk. Lock this by hoding setup and press tab. Click lock tab. Then on the help screen press the text button and type "Times" or "Go in A/B" in on the key pad...
-
Hi yes a very easy way all depends if you have set time in A or B in the setting I have it in B so I can then run the cue as I have set it. just press ? In ? Out. This sets times to preset ready to run in B, Or if you have time and know the cue times. Record all the cues in a default time say 3 or the...
-
Hallo, gibt es eine Möglichkeit bei der Congo, das die Zeiten alle koplett angezeigt werden im Hauptplayback? In der Voreinstellung sind die Zeiten bei mir auf 5 Sekunden eingestellt.Ist die Stimmung in B geladen, werden diese auch angezeigt,aber nicht bei den Stimmungen, die danach kommen.Dann...
-
Hi all sorted, For a reason the chase wasnt acting on Rate, you need tochange in and out time to what you need so as I needed a step chase change these to 0.1 then use the tap button to get you tempo. If the in / out is set to nothing the chase carnt finish so it loops, Hope Ive explained myself ok as...
-
Hi all just wondering how many people actualy use a wait on CFB on stagger there movers, I use this quite a lot many on Colour which looks really cool when fading to congo as I stagger each unit in a FAN effect. I have a big dance show next week and will use this loads for a wait on for my side scrollers...
-
Hi Tom, I am sure you are aware, that follow-on times need to go in the Cue before the one you want to follow on, where as wait times need to go in the Cue you want to wait. Also you have to step a Cue back and "run" into the Cue with the time on it to work. Also make sure you don't have...
-
I usually busk shows. More often than not, I'm selecting the fixrures, typing the time, then pressing what I want to happen. This seems to work for everything, except the gel picker, as the number typed becomes the gel number. Is there any way around this, maybe by setting a default time for the...