-
Hey, I'm attempting to put together a new template for a laser using the Congo Offline Editor on my Macbook Pro. I can get as far as adding the template (using the rather convoluted Cmd-Fn-Backspace) but cannot add any parameters. There are currently none defined, so I cannot add a parameter to the...
-
I am trying to setup and use a DLED 12 LED fixture (this has 4 of each LED color: red, green, and blue) on our Congo jr console. It works fine in 6ch mode (using 6ch template) with all the red LEDs together, green LEDs together, and blue LEDs together using the color dials to adjust them, and 3 other...
-
Hi All, I've recently made templates for the Robe DT3000, DT5000 and DT7000 for Congo. These are included in the Standard Library in the upcoming v5.1.0 release. If you want to have these templates before v5.1 is released, let me know and I will post a Congo showfile with them here. Oskar
-
Hi Carl, The values in the template editor are always 0-255, only in the range editor is it possible to enter 0-100% values but the 0-255 values are also shown there. Where exactly do you want to change 100 to 255 and how? I'm not exactly sure what you are refering to. Have you used the scroller rolls...
-
Hi, I had a quick look at the Jem 24/7 Hazer manual and a template for this device is a pretty simple one. I have no idea what might be wrong in the template you made, but I just made a template for it so you can check if this one looks different then yours. I made the first channel be Intensity and...
-
See attached showfile for templates! There are two templates - "Jarag5 5 chan" for fixture version 1.2 and "Jarag5 6 chan" for v2.0 I've treated the 'effects' it does as Gobos as that seems to make the most sense: "Gobo" to select Sequences "Gobo Mode" to select Sequence Banks "Gobo <>" to set...
-
Hi, Here is a show with templates for the NAT MM 1200 15/30 in both 18 channel mode and 20 channel mode. To get these into your showfile, you can use the Import Wizard in the Browser to import them from this show to yours. You are also totally free to change things in the template if you want or need...
-
Hi, Looks like the DMX spec for the 600 is different then the 500. So I just made a template for you for the 9ch version. If you want to use it in 7ch mode, then you can delete the last two lines/parameters in the template. If you already have a show you are using, please use the Import Wizard to import...
-
I haven't tested this on a real Elipscan, but it is accurate to the manual. Notes: The optional Relay is on the Strobe attribute, as it isn't really an intensity. The Pan and Tilt speeds are merged into a single Focus Speed attribute, as it is rare to programme these differently.
-
Hello, You can press FORMAT & @LEVEL to change the LCD above the wheels from showing 0-100% levels to showing 0-255 (or 0-65535 if 16-bit) levels. The Intensity is also output as 8-bit, but you cannot see the 8-bit values. But if you press and hold the "." (point button) and press +% or...