Electronic Theatre Controls
Welcome to ETC's Online Community
All Tags » RFR (RSS)

Browse Forum Posts by Tags

Showing related tags and posts for the Forums application. See all tags in the site
  • Re: Firmware update for RFR

    Yeah, I have a Mac, too. Steve from tech support gave me instructions on a full console re-image in order to get XPe updated (which I will eventually do, but it involves completely wiping all saved data and settings). I will investigate other methods to update the RFR for now. Does GCE work on the RVI...
    Posted to The Eos (and Ion) Forum (Forum) by nfarwell on 02-19-2009
    Filed under: ION, RFR
  • Re: Networking RFR in 1.4.4

    Ellen- Thanks for the rev. C guide. It explained it all- I had to load the GCE onto my laptop and use that to configure the RFR base station and give it a static IP address. There is no DHCP server on our lighting network (by design) so the base station was defaulting to an IP address that would not...
    Posted to The Eos (and Ion) Forum (Forum) by tdrga on 02-09-2009
    Filed under: RFR, GCE
  • Networking RFR in 1.4.4

    I just updated our EOS console, RPU and RVI (+offline PC) to 1.4.4 and the RFR to 2.0. I have no communication with the RFR when trying to use it via Ethernet. When it is plugged into the RPU via USB, it works fine. I connected the RFR base station into our POE switch with a normal Ethernet cable- it...
    Posted to The Eos (and Ion) Forum (Forum) by tdrga on 02-09-2009
    Filed under: RFR
  • Firmware update for RFR

    Hi there Just upgraded to Ion v1.4.4 and currently trying to upgrade the RFR firmware to v2.0 Had some issues trying to upgrade - both the base station and remote didn't want to play nicely. I had the USB key with the new firmware inserted, however I always got a message saying i needed to use the...
    Posted to The Eos (and Ion) Forum (Forum) by BrentFJ on 02-01-2009
    Filed under: RFR, GCE
  • RFR Screen Wake Up

    When the screen goes dark I wish a button press just woke up the screen/backlight and didn't actually perform whatever function it was programmed for. My cell phone is like this. For example if I start to write a text message, put the phone down for a bit which causes the screen to go dark, then...
    Posted to The Eos (and Ion) Forum (Forum) by bosox242 on 12-13-2008
    Filed under: RFR
  • Re: RFR stuff

    Clayton wrote: >When plugged in and the power switch is in the off position, the RFR boots up, . . . . It doesn’t do it every time I plug the RFR in, but it has been >occurring more often. AMR: This has been happening every time with my RFR units (2) since they arrived in March (v1.3.x). I agree...
    Posted to The Eos (and Ion) Forum (Forum) by Andrew Riter on 11-01-2008
    Filed under: RFR Battery Charging, RFR
  • Re: RFR connection problems

    Hey guys, Related to the RFR problems you guys have mentioned, and it may completely be the same problem, but I've also encountered problems with my RFR and the Ion. It very randomly decides to connect or not to. Even when it is connected, it decides to disconnect randomly as well. Even when standing...
    Posted to The Eos (and Ion) Forum (Forum) by TRex on 10-27-2008
    Filed under: ION, Wireless connectivity, RFR
  • NPs on RFR?

    New to the forums, so I don't know if this has been covered before. Is there anything in the works for getting non-intensity parameter control on the RFR? I got all excited when I heard about the iRFR, but from the looks of the Congo RFR, it will just be a mirror of the actual RFR. I was hoping there...
    Posted to The Eos (and Ion) Forum (Forum) by Toasty42 on 07-19-2009
    Filed under: EOS, RFR
  • RFR issue

    I've been out of my theatre for a couple months and got a call from the guy taking over that the RFR isn't working. Upon booting, it promptly displays "HF error" and I can't seem to get past this. I don't know any background info as to what may have caused this and can't...
    Posted to The Eos (and Ion) Forum (Forum) by MarkLNeumann on 07-22-2009
    Filed under: RFR
  • remote upgraded to 2.0.2 changes

    Hi ETC, et al. I've just upgraded my consoles to 1.4.5, and the remotes to 2.0 (basestation) and 2.0.2 (hand held). I've noticed that when charging off the USB wallwart, the unit thinks it is on. If you touch a button to wake it up, the screen says "Direct USB" and the next 3 text lines...
    Posted to The Eos (and Ion) Forum (Forum) by Andrew Riter on 07-23-2009
    Filed under: RFR Battery Charging, RFR
Page 2 of 6 (51 items) < Previous 1 2 3 4 5 Next > ... Last »
Powered by Community Server (Commercial Edition), by Telligent Systems