Electronic Theatre Controls
Welcome to ETC's Online Community
All Tags » RFR » EOS (RSS)

Browse Forum Posts by Tags

Showing related tags and posts for the Forums application. See all tags in the site
  • RFR shutting down - Battery Issue??

    Has anyone had this issue: The RFR is not wanting to work when it's not plugged into its charging cord. It was working fine until a couple of days ago. I checked to see if it was just that the batteries may be run down and charged it for 24 hours. No change. It boots up fine, finds the base station...
    Posted to The Eos (and Ion) Forum (Forum) by Sandi Bohle on 04-18-2009
    Filed under: EOS, RFR EOS, RFR
  • NPs on RFR?

    New to the forums, so I don't know if this has been covered before. Is there anything in the works for getting non-intensity parameter control on the RFR? I got all excited when I heard about the iRFR, but from the looks of the Congo RFR, it will just be a mirror of the actual RFR. I was hoping there...
    Posted to The Eos (and Ion) Forum (Forum) by Toasty42 on 07-19-2009
    Filed under: EOS, RFR
  • Another RFR Question.

    Greetings. I'm having considerable difficulty getting an RFR to work with my theater's Eos board. I've combed through the most recent manual for the board, to no avail. The base station is plugged in through USB, and the "Receive" light on the back of the base is green, so I'm...
    Posted to The Eos (and Ion) Forum (Forum) by samuelvonallen on 05-17-2010
    Filed under: EOS, RFR EOS, RFR
  • RFR feature request

    Is it possible to add a Part softkey to the Patch screen in the RFR software? I often am patching fixtures with multiple parts that have a remote dimmer (scrollers, VL1ks specifically) on the fly with the iRFR and want to be able to patch the lamp into Part 2. I haven't figured out a good way to...
    Posted to The Eos (Gio and Ion) Forum (Forum) by jrgoss on 11-04-2011
    Filed under: EOS, patch "multiple dimmers", ION, RFR, Patch, iRFR, Feature Request, aRFR
  • Cue stack on desk not following RFR of iRFR

    Think this has just appeared on V2 software. If I run some cues from my remote, the screen and output follows but, if you then look at the cue label above the GO button, it shows the last cue you were in before you started. Is this a fault with the new software?
    Posted to The Eos Family Forum (Eos Ti, Eos, Gio, Ion) (Forum) by Michaeldonoghue on 06-01-2013
    Filed under: EOS, RFR EOS, EOS Cues, RFR, Cue List, Cues, Cue Lists, iRFR, cue, cue stacks, 2.0 upgrade, 2.0
  • EOS RFR

    Can addresses be brought up on the RFR? I've gone thru each screen and don't see a way to do it.
    Posted to The Eos (and Ion) Forum (Forum) by Sandi Bohle on 04-13-2009
    Filed under: EOS, RFR EOS, RFR
Page 1 of 1 (6 items)
Powered by Community Server (Commercial Edition), by Telligent Systems