Electronic Theatre Controls
Welcome to ETC's Online Community
All Tags » Paradigm (RSS)

Browse Forum Posts by Tags

Showing related tags and posts for the Architectural Controls group. See all tags in the site
  • Some resources for Control Designer layouts

    I got to do a small Paradigm system at BYU recently - was looking for some custom icons that looked like wood grain to match one of the background images I'd created from some photos I'd taken in the space. I ran across this site: http://icons.mysitemyway.com/ . They have tons of different styles...
    Posted to Unison Dimming and Control (Forum) by jmcgregor on 01-13-2010
    Filed under: Control Designer, Paradigm, lcd paradigm unison, unison
  • Paradigm Space Master on a fader station

    HI I never noticed this on a Legacy system. When the off button is active and all faders (including the master) are at the 0 position. I take the master to 100% then back down to 0% and then up again it takes all the lights to full. This may be what it is supposed to do but would like to know if there...
    Posted to Unison Dimming and Control (Forum) by kpsken on 01-01-2011
    Filed under: Paradigm
  • Push buttons and master control

    Hi, Ive been asked to set up a 5 button 1 fader station so that the buttons will pull up a recorded preset. The level of the lights is to be determined by the location of the fader. The intention is to drop a set of preset/group of lights to zero, select a new preset/group and fade them in. So far all...
    Posted to Unison Dimming and Control (Forum) by Steve_aitch on 07-27-2012
    Filed under: Light Designer, Paradigm, unison
  • Re: Paradigm Architectural Control Processor - Control through PC

    Matt, The web interface that is built into every Paradigm Processor provides quite a bit of functionality from any device with a web browser with absolutely no additional setup, programming, or cost required. There is a video on our You Tube channel that shows what is possible from the Paradigm Web Interface...
    Posted to Unison Dimming and Control (Forum) by bpalmer on 11-20-2012
    Filed under: Paradigm, Web Interface
  • Paradigm Sequence/Timed Event Question

    Hello, I would like to make a simple sequence that corresponds to the time of day using some LEDs. So the look would contain the most red from say 12-2 at the warmest part of the day and then slowely move to blue as dusk and night come. I would like the looks to slowely fade into one another as well...
    Posted to Unison Dimming and Control (Forum) by Jake on 06-05-2013
    Filed under: Paradigm
  • Re: Unison touchscreen system design

    You will need a processor of some type. In this case you will need a Paradigm processor to go along with the touch screen.
    Posted to Unison Dimming and Control (Forum) by Jeff Mabray on 10-20-2009
    Filed under: Paradigm DMX, Paradigm
Page 1 of 1 (6 items)
Powered by Community Server (Commercial Edition), by Telligent Systems