-
I have managed to set up network setting on the Congo and Laptop using a fixed IP address. I still get no Client option on the startup on the laptop. Drivers are installed and show under sytem when I insert the dongle. Both are running the latest update - setting seem to be the same as far as I can tell...
-
The Arkaos template is quite a strange one - when you import it, it's almost completely empty of range names etc, as Congo populates it when 'connecting' to it over the MSEX protocol. Note that Arkaos doesn't have any Focus parameters at all - you'll see things under Colour and Beam...
-
Hi Gareth, Please check that you have the IPX network protocol installed under Windows on your laptop (normally, only TCP/ IP is installed by default). Do this by: 1. Go to Network Properties in your PC (right click and select properties on the Network symbol in the Control Panel) 2. If the IPX/SPX protocol...
-
To set two Congo jrs together as Server/Backup, you'll need a standard 100MB capable Network Switch and a pair of Cat5 or better straight-through cables. If you already have a lighting network, the two simply plug into this network via Cat5 patch cables. Before plugging in, there are a couple of...
-
Hi guys, I have been experiencing a problem with my Congo for some time now wherein I will have a preset loaded and sitting static and randomly the console will change values on all my different fixtures attributes. The value changes will be the same for all fixtures of a certain type (ex. Revolutions...
-
Has running Congo 6 software editor as a client been tested on Windows 7 by anybody? I remember that the client mode wouldn't ever work right in Vista, but I haven't had the need to try it on Windows 7 yet, as i have access to (relatively) unlocked Windows XP Laptops through my uni's ITS...