-
So. We have one sensor rack (has ethernet plug on front, DMX cable /input isn't accessable at all) We have a ETC Express 24/48 connected to it (has universe 2 still free along with free ethernet plugin) the board is in the booth... far away from the rack fyi). For a upcoming show we would like to...
Posted to
Networking Discussions
(Forum)
by
John
on
03-10-2009
Filed under: net3, brand, computer, DMX, gel changers, USB, ethernet, etc, ideas, express, moving gobo
-
On the website, it describes 3 options... portable/table top, touring, and wall mount. The data sheet lists wall mount and touring... Any idea on what the cute, little, 1 gang --portable / table top unit model # is with the ethercon installed in the backbox... as pictured on the website?? Thanks -Bob
-
sclausen: I believe if you install NCE or GCE on your console, you will get buttons in the Settings (the system settings available from the startup screen) to launch those programs. Also, Net3 Services may be installed on consoles running v5.0.x software to provide DHCP and time server functions from...
-
Our current setup: Lighting Network: EOS console, 4 Sensor CEM+ racks, 1 4-port DMX gateway, 1 Show Control Gateway, Net3 jacks around the theater, 2 10/100 switches for interconnections. Audio Network 1: Audio console (Yamaha M7CL), Audio Playback/Show Control PC (Stage Research SFX 6.0), 4 Audio Distribution...
-
Hi guys, I have been experiencing a problem with my Congo for some time now wherein I will have a preset loaded and sitting static and randomly the console will change values on all my different fixtures attributes. The value changes will be the same for all fixtures of a certain type (ex. Revolutions...
-
I have two questions open to anyone: 1) I am currently running 10 HES Studio Color 575's on my ION and the Lamp Off command isn't working. The fixture reset command will and the lights function as normal, but all Lamp Off does is open and then close the dimmer shutter. Is there a specific command...
-
I recently purchased a Net3 Radio Focus remote. It works great in terms of usability and built in features but the battery only lasts around 3 hours. Is this normal or do I have a duff version but the spec sheet does not mention battery life? Given the size of the thing and small and low spec display...
-
Hi I have a little problem with Congo. I had 5.0.1 version and try to install 6.0.3. Installation complete successfull, but I have little bugs. 1: when I switch on console, buttons on console not work, untill I press mouse buttons 2: RFR not work. First time firmware on remote was 0.29d. Then i install...
Posted to
The Congo Forum (and Congo jr, too!)
(Forum)
by
Vova
on
06-24-2010
Filed under: Congo, Upgrades, Firmware, V5, errors, Net3, RFR, v6, error, v6.0.3
-
Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 Hello; I´m currently working in a Venue setting up an Ion console and I am in such a hurry because I have to configure the DMX input through Artnet...
-
Hello I have got a net3 four ports node with 1 DMX input. It is possible to use node only with Wysiwyg like a DMX input without console to use it with smartfade ML for example