-
I've noticed that the LED fixture profiles include parameters for Brightness and Intensity. What's the difference? I'm asking because of the behavior of the Color Blaze 72s that were just installed in the theatre here. It may be that Saturation is actually the problem, but we haven't...
-
We have 9 Thomas Pixcel line led batterns for a production coming up, They have a fixture that exists in the patch which uses 55 dmx addresses, once patched they only give RGB control Is it RGB control over all 55 channels Is there a way of isolating down to just one of the "cells" (the first...
-
I thought I had this figured out but then it went "oh so wrong". I wanted to isolate the Virtual Intensity of 9 Ice instruments to a single fader as well as each of the individual colors. Then I wanted to do the same to a group of nine Fire. I want to mix those washes on the fly. I thought...
-
We have semi-recently acquired an Ion at work along with some "Iluminarc - Ilumipod 48 IP" LED fixtures. We have noticed that when linked to a sub master these fixtures tend to look very steppy when ramping up the intensity. When running them in a cued scenario the fade up/down times occasionally...
-
Starting a project with 18 RGBWA LED Colorado Batten 72 fixtures - rear lighting cyc from bottom and top in Block-2 mode. Anyone have any special wisdom learned from how ION effects treats Amber and White parmeters (or just use RGB paramters?) - fixtures are still on order - just trying to plan ahead...
-
We are doing a show with ChromaQ Colorforce 72 Battens and Color Kinetics Colorblast 12 TRX LED fixtures. The Colorforces are being used with their standard library personality (mode 9) and the Colorblasts are using personality Generic RGBAW (there was no TRX personality we could find). We are doing...
-
Within the elation library there are fixtures very similar but not an exact match to this. I have attempted to create my own fixture [displays] [patch] {fixtures} by adding in the values using the fixture's manual. num 1- red-8bits- DMX 1 num 2-green-8bits-dmx2 num3-blue-8bits-dmx3 (at this point...
-
In short I am looking for a quick/easy way to convert a show file from using multiple wash groups (conventional lights with different gels) to one LED wash group. I work for a road house theatre considering replacing rep cyc and back/top washes with LEDs. For simplicity lets say we replace our three...
-
I have been researching this effect and each time something similar is explained, they only deal with one parameter. My idea has two parameters. I am looking to make a fire type effect with multicolored LED fixtures. I need to take 5 units and randomly have each at differing percentages of intensity...
-
Howdy everyone. We have a show that we are moving into a competition tomorrow and I'm running into one large question that I didn't get time to work out for myself in the shop today. The venue that we are going into has SpectraCYC units, but unfortunately that's all we know. We don't...