-
I am trying to setup and use a DLED 12 LED fixture (this has 4 of each LED color: red, green, and blue) on our Congo jr console. It works fine in 6ch mode (using 6ch template) with all the red LEDs together, green LEDs together, and blue LEDs together using the color dials to adjust them, and 3 other...
-
Hallo, wird es in Zukunft weitere Effekte für den Chaser geben? Es gibt ja nur zwei Arten von Chaser, abwechselnt oder aufbauend. Ist ein bißchen zu wenig. Es musste doch möglich sein einen Chaser auszuwählen, als Flicker oder Zufall u.s.w. . Wird die Effekt Tast bald belegt?? Was...
-
Hi all sorted, For a reason the chase wasnt acting on Rate, you need tochange in and out time to what you need so as I needed a step chase change these to 0.1 then use the tap button to get you tempo. If the in / out is set to nothing the chase carnt finish so it loops, Hope Ive explained myself ok as...
-
Hi all OK I have a RGB chase made up of 8 point cues, Ive transfered these to master and my chase work fine on these, the problem is when i put my pessets in a seq and make them into a chase, The chase starts but each step adds to each one instead of swapping form step to step, Ive tried X.M,L but its...
-
Hi Mike, The template does not necesarily need to have an Intensity parameter for Fade with Intensity to work. Fade with Intensity will work two ways. 1. With an Intensity parameter in the template. 2. Without an Intensity parameter in the template. But then you have to have the channel your RGB device...
-
Hi to you to is it me or is it just me having problems / questions on the congo or is everyone else an expert this desk !!!!!!! :P OK After long night on my offline congo I believe that I now have all my pixelines patch and my effects working OK and I can create some mean effects using the Congo Dyn...
-
Hello again, I don't have any experience with the PixelLine, but I just had a quick look at the PixelLine 1044 manual and to me it looks like you can set them to RES 27ch, but then you will loose the effects since RES is only available in the DMX mode (not in Max1). And DMX mode doesn't have...
-
Hi all, I'm using 8 Pixel Line 1044 on a outdoor event and have no time to plot really. So my question is I would like to run these so each battern has 6 cells. I then would like to have different groups to do different things during the concert. (e.g I want all the bottom cells in one group and...
-
Have you set the RBBAW to fade with Intensity? This should solve your 2nd problem. Templates in the Browser and open the Template. On the right hand side is a colum "Fade with Intensity". Tick the box for RGBAW. Hope that helps Florian
-
Hi all, Quick question....... Does Strobe / flicker / Morse work on Int for LED if they are Fade with Int ??? Not on the desk till tonight and it just popped into my mind. Thanks Carl