-
The only threads I've been able to find here are about converting between obsession and expression consoles. Are files made in any Expression Series console fully compatable with other Expression Series consoles? For example, I'd like to pre-program a show into Expression Off-Line with the Expression...
-
Thank you for clarifying Sarah. Do I have DMX In correctrly in that it uses one console to cue another? And that the slave console shows up as basicly a preset to the master? I'm still not clear on how that works. But I do understand the two espressions merged portion of the lesson. so many channels...
-
First of all, I would like to thank everyone who is active on this forum for the amount of help they have given all of us who are making the jump to the EOS and ION. I have just a few questions that I have not yet had answered by browsing the forums. 1. I am a student at Michigan State University. This...
Posted to
The Eos (and Ion) Forum
(Forum)
by
pjveltri
on
12-10-2008
Filed under: scroller, Ion Review, ION, Ion Console, training, Ion Cuelist Playback, scrollers, Calibrate, Color Source, Expression, Import Cues ION
-
My Expression 3 is occasionally giving me this information on powerup: Expression 3 / 400 Boot ROM ver.3.0 DRVSPACE select a program to run using + or - No Help Available Soft Keys are as follows S1 RUN PROGRAM S2 through S6 Empty S7 RECORD TO FLASH S8 RUN FROM FLASH Why does this happen? After several...
-
I'd probably stay away from making it a bunch of cues, and look at using submasters as your individual adder items. The base look could be a cue, but you can't play back more than one on each set of faders on the Expression series consoles. Even then, they are HTP pileon to each other, and won't necessarily...
-
I would like to create a personality for the Elektralite MY250i. The problem is that the channel assignments in the fixture put Pan Course on 5 and Pan Fine on 14 and the same goes with Tilt Course(6), Tilt Fine(15). Since the editor only allows 16bit channels to be consecutive, is there a way around...
-
Unfortunately, there is no way to input ASCII to Obsession II Offline. I don't work for ETC, but I believe ASCII output was added to version 5.2 Offline as an "upgrade path" to Eos. That's why they went to so much effort to create and implement the many ASCII extension-keywords that weren't part of the...
-
Is the specs for the ETCNet protocol freely available? My school has an Expression 3 based system and I've been looking in to building a wireless interface I can run on my laptop to remotely control the E3 board. I read this story, http://www.etcconnect.com/installations.education.asp?ID=20018, and...
-
I recently bought an ION and imported my Christmas show from Expression. I love it so far. I went through to patch my scrollers to the 'parts' of the repsective fixture channels keeping their old address. And I also patched my studio spots to new channels but kept their old address range. The...
-
I have a Expression 3x where the submasters are topping out at 96 or 97 %. this is preventing the inhibitives from taking control as they have to go to full to be activated. I didn't think there was an operator setting that could do that but the shop is saying its somehwhrer in the setup.