Electronic Theatre Controls
Welcome to ETC's Online Community
All Tags » Express » 24/48 (RSS)

Browse Forum Posts by Tags

Showing related tags and posts for the Control Consoles group. See all tags in the site
  • Strange Effects Issue

    Hello All, I'm running an Expres 24/48 with software v3.1. We have two moving lights and a couple scrollers. We are running a few effects cues with the scrollers, but not the moving lights. While stepping back and forth during tech, the moving light channels seem to get stuck in some kind of loop running...
    Posted to Express/Expression/Emphasis and Obsession (Forum) by MikeTR2000 on 06-24-2008
    Filed under: effects, Express, 24/48, 3.1, Intermittent
  • Express 24/48 Lock Up/ Freezing

    I am currently using a Express 24/48. Recently, I have had a number of freak occurences happen, such as jumping to the Park page with no buttons being pushed, locking up while running a show (no control over any thing, no buttons function), and tonight, an effect sub not disabling with either the preprogrammed...
    Posted to Express/Expression/Emphasis and Obsession (Forum) by Techman11 on 05-09-2010
    Filed under: Express, 24/48, express', help, exprssion, freeze, console
  • NEED HELP - Quick Expression Offline Question

    So I just built an entire show in Expression Offline editor thinking that the console the theatre has is an Express 48/96. I just found out that they actually have an Express 125. The file is still the same and should be able to go into that console fine right? Is the only difference that now I'll...
    Posted to Express/Expression/Emphasis and Obsession (Forum) by needhelp on 11-16-2010
    Filed under: express 48-96, Expression offline version 3.11 compatibility expression 350 console, Offline, Express, down-conversion, 24/48, express', express 24/48
  • Problem Patching Express 24/48 to Chauvet Q-Spot 260 LED ML

    I am having difficulty with an Express 24/48 console communicating with a Chauvet Q-Spot 260 moving light. Here's what I have done so far: 1. I started with 48 Channels and 48 dimmers. Since the Q-Spot requires 14 DMX channels, I added 28 more dimmers and 28 more channels in Setup. I now have a total...
    Posted to Express/Expression/Emphasis and Obsession (Forum) by Dave_Williams on 01-11-2012
    Filed under: Express, Personality, 24/48, dimmers, dimming problems, Moving Lights, MLs, Patching
  • Changing Master Fader Causes Focus Points to Change Values

    I am new to MLs and only just yesterday installed and configured my first two MLs being controlled by an Express 24/48 console. As a first attempt (thinking this was the best way to do it??) I saved several "looks" as Focus Points. Then, I saved each Focus Point into Cues so that I could call...
    Posted to Express/Expression/Emphasis and Obsession (Forum) by Dave_Williams on 01-11-2012
    Filed under: Express, 24/48, problem, express 24/48, freeze, Intelligent Lighting, Moving Lights
  • Lighting Software(PC) vs. Lighting Console

    I have read a couple threads and some information on this, but wanted to get some feedback on my specific situation. I am the technical director at my church and we are currently have an opportunity to possibly get a really good deal on a used lighting console, but I wanted to make sure it was the right...
    Posted to Express/Expression/Emphasis and Obsession (Forum) by maccm8 on 07-24-2012
    Filed under: express 48-96, Express, Obsession II, 24/48, dimmers, etc, express 24/48, sliders, obsession ll console, console, expresss, computer, software, etc express 48/96, etc obsession II, etc express 24/48
Page 1 of 1 (6 items)
Powered by Community Server (Commercial Edition), by Telligent Systems