-
Yes - for this you use the function "Lockfade" Create your initial look and record as normal. Make the change you want to take place over 40 minutes and hit [Record] Important - don't make any other changes! All the changes you record now will be part of the "Lockfade" Switch over to the Advanced tab...
-
The easiest way is to set up a default show file. You set the desk up the way you want it ( at mode or direct mode, screens, your standard groups and so on) save it as default show and then start programming with this file every time you start programming. Or you go in Browser->Files->Import, then...
-
Hi John, In Preset 1 you type in 100 and then press and hold [Insert] and then press the Master Assign Key [20]. You should now see on the bottom of you screen {Masterlink created}. Then you go to Preset where you want it to stop and type in [0] and then press and hold [Insert] and then press the Master...
-
I haven't tested this on a real Elipscan, but it is accurate to the manual. Notes: The optional Relay is on the Strobe attribute, as it isn't really an intensity. The Pan and Tilt speeds are merged into a single Focus Speed attribute, as it is rare to programme these differently.
-
For referance, every console channel can have the following patched at the same time: Any number of dimmers/individual DMX addresses. These follow the Intensity of the channel. One (1) Device. This device can have any number of individual Attributes. So for scrollers and moving lights with an external...
-
Hallo, ich möchte gerne wissen, ob man die Spalten von Text , Zeiten formatieren kann? Ich meine ob man die Spaltenbreite ändern kann.Wenn ich den Bildschirm schon formatiert habe FORMAT & Pfeiltaste links, werden ja meine Devices , Dyn und so weiter nicht mehr angezeigt.Wenn ich jetzt...
-
Hello, new to the forum and new to using the Congo. I'm having some teething problems with getting used to the controls as it's not like desks I have used in the past. What I am looking to do is create Multiple Cue Stacks, and assign each Cue Stack to a Master Playback (instead of imputting a...
-
Multiple sequences are often the best way to do this, as it's an easy way to organise your presets into songs that may be re-used in any order. You can either do this manually, or get Congo to do it automatically using a Playlist. The manual method is to load a new sequence onto the Main Playback...
-
Hey All I work for the University of Iowa and we just purchased some SeaChangers. They all came with a color matching spreadsheet and I thought to myself "I wonder if I could make a parameter for the SeaChanger that had all of the colors premade.” That way every time I would load that template...
-
Yes indeed it is! Two methods: Use the {Ch Delay} softkey under {Times...} # [Ch]&[Delay] shortcut These shortcuts use your "Set Times To" A/B option to determine the sequence step they apply to. To set these: Select the relevant channels by any method. Type the number of seconds to delay...