-
I've got an EOS Client set up with an x-keys (one I made myself a long while ago, not the ETC provided file). I can't seem to get [park] [park] to work on the x-keys the way it works on the console. Is this a problem with my x-keys configuration, or is it an issue with client? -Bryan
-
I have a show coming in that wants to use two programmers, one for conventionals and one for moving lights. I know that this can be done with partitioned control on the EOS, but I need to make sure that a client or RVI can be used for the second programmer. I would try this out but I can't reconfigure...
-
I am running Eos Client on a Mac through Parallels. When I select the Playback Status Display tab I can only see two cues at the top of the display - the rest of the display is the window showing the list of cue stacks. I'm only running 1 cue list for this show and can't seem to figure out how to get...
-
I have 2 studios with one ION each on one dimming network via ethernet (sensor+ with CEM-Module). Also a small set with an ELC DMX-Recorder using a NET3 Gateway accessing these dimmer-network. The ION's has to back up each other, but I can't find a proper way. As Master/Client the lights are going off...
-
Hello All, Many thanks to Tracy Fitch from ETC Technical Services for helping me connect my laptop to my Ion. I am trying to use the shortcut keys on my laptop to control the console but many seem to not be working. The number keys work, the Backspace key clears the command line but "T" just puts a ...
-
Dearest ETC Tech Support, So I have my ion board set up in primary as master and I have the client software installed on my laptop. In network settings int he client it recognizes the Ion and allows me to change host, but it stops there. It gets stuck while connecting to host, the Ion, and when it times...