Hello all,
I hope this makes sense:
Element 60/250, 8 mac 250
In the past on a different console I did this, I dont remember how or if possible.
While making focus pallets with mac250's I would like all the lights to be in dark blue, and as I step from light to light adjusting the focus I wish it to go N/C so its easier to focus.
Is this possible without a lot of button pushes, I wish to just push next, adjust, push next, adjust, etc, etc, update pallet. and move to the next position....
Thanks
Sean...
Sean Carrico
TD
JAPAC
A few variations were discussed in
http://www.etcconnect.com/Community/forums/p/1016/33638.aspx#33638
Rick Reid, LC
Silhouette LIghts and Staging
Highlight is the feature you are looking for. Read about it in the linked post above or in the manual, whichever you prefer.
-Tim
Thanks for the link, I have not found the "highlight" button yet, is it on the element, I will keep lookin, but it does not have some of the same buttons as the other lines, but I am still new to it,thanks
Sean
Hi Sean,
I'm 99% sure that Element doesn't have the Highlight feature that the rest of the family has. You do though have the option to make your master fader pair Intensity Masters which means you can use them to pull down the rest of the recorded state to a lower level, but that won't strip out the colour in the unit you're working on.
Cheers
Dan
Daniel Murfin
National Theatre, London
Highlight is supported in Ion, Gio and Eos consoles, but not Element at this time.
That's what I was afraid of, thanks for the confirm.
I did come up with another work around, couple of extra pushes but helps.
Group 101 enter
Next full enter (adjust focus)
Out next full
Repeat till done
Clear select last (s1) full enter
Confirm look update pallet enter
Its what I came up with in a pinch
Again thanks
Does element have RemDim?
That ought to do what you want.
Richard