Within the elation library there are fixtures very similar but not an exact match to this. I have attempted to create my own fixture [displays] [patch] {fixtures} by adding in the values using the fixture's manual.
num 1- red-8bits- DMX 1
num 2-green-8bits-dmx2
num3-blue-8bits-dmx3
(at this point the board adds in hue, saturation, brightness )
[I skipped the fixture's random effects channels and auto modes because I wasn't going to use them]
num7-strobe_mode-8bits- dmx6
num8- intens- 8bits- dmx7
num9- zoom- 8bits- dmx8
Despite this configuration it does not respond. Am I missing something?
Regards,
Ericj.
I found the issue. It seemed to be that the strobe setting needed to be activated. If you activate the strobe to a setting that doesn't actually strobe it activates the fixture. Kinda of a pain, but it works.