Hi
We have a Congo Jnr running V6.0.2 with a master wing and extra 2 x 10 fader wing.
We are having problems with faders loaded up with Presets, channels and Groups as the contents stop outputting. The fader appears to have the relevant content as the text still appears in the fader window but when you push the fader up the content doesn't output. If you Modify + Preset or Group the content is programmed in correctly. If you reload the same content into the same fader the content then outputs again.
I did think this was just happening after I programmed something new into a fader and this does certainly trigger it but last night I was running the desk for about 5 hours on a show and it was just randomly happening.
We have noticed this for a while and not attached the extra fader wing to see if this would help but it happens with just the master wing attached.
1. Is this something your aware of and is there something I can do to resolve this?
-- I had assumed that changing the page on the Master wing would also change the page on the extra 2 x 10 wing. It doesn't.
2. How should I change it's page? It seems to be stuck on page 3??
-- Looking in the Masters view of various pages it shows faders 61 - 80 has contents loaded onto faders. I've not done this as we don't have those faders.
3. What might be happening here?
4. Is it ok just to have 60 faders and not a block of 40 or 80?
We have also noticed that sometimes the LED next to faders (with loaded content) don't always light up.
In Congo each Master Page is actually only 20 Masters.This lets you leave the bottom row (eg) of Masters the same while changing the top row.
To change page on the 3rd bank look unders the Masters softkey on the Congo jr main module.
There are {Page+} and {Page-} softkeys, and also {1-20}, {21-40}, {41-60} and {61-80} softkeys.
Hold down the {41-60} softkey and press {Page+} or {Page-} to step through pages on the 2x10 Wing.
Alternatively, type in a page number and press {41-60} to jump straight to that page of Masters.
Keep on trying till you run out of cake.
There is a known bug in v6.0.2 when switching master pages for a master where the content doesn't change. In this case, the control of channels in a preset or a group will be lost.
This is fixed in v6.0.3 that is currently going though extensive testing. Release date isn't fixed yet.
Anders Ekvall
ETC Software and System developer
I see. Makes much more sense now. Thanks for that!
Hi I have problem with masteLink in SEQ. It's not working well. Afcourse 6.0.2.
Hi Michal,
sorry to hear you are having problems - I am not understanding exactly your problem.
Could you send us a copy of your showfile and a description of which cue/seq you are having
a problem with and what the problem exactly is to congo (-at-) etcconnect (dot) com .
THANKS!
ETC Tech Services