Electronic Theatre Controls
Welcome to ETC's Online Community

DLED Par Zoom 8chan

rated by 0 users
This post has 1 Reply | 1 Follower

Not Ranked
Posts 2
Ericj Posted: 04-15-2012 5:58 PM

Within the elation library there are fixtures very similar but not an exact match to this. I have attempted to create my own fixture [displays] [patch] {fixtures} by adding in the values using the fixture's manual.

num 1- red-8bits- DMX 1

num 2-green-8bits-dmx2

num3-blue-8bits-dmx3

(at this point the board adds in hue, saturation, brightness )

[I skipped the fixture's random effects channels and auto modes because I wasn't going to use them]

num7-strobe_mode-8bits- dmx6

num8- intens- 8bits- dmx7

num9- zoom- 8bits- dmx8

Despite this configuration it does not respond. Am I missing something?

 

Regards,

Ericj.

 

 

Not Ranked
Posts 2

I found the issue. It seemed to be that the strobe setting needed to be activated. If you activate the strobe to a setting that doesn't actually strobe it activates the fixture. Kinda of a pain, but it works.

Page 1 of 1 (2 items) | RSS
Powered by Community Server (Commercial Edition), by Telligent Systems