Electronic Theatre Controls
Welcome to ETC's Online Community

Congo Jr motherboard update/replacement

rated by 0 users
Not Answered This post has 0 verified answers | 2 Replies | 2 Followers

Top 500 Contributor
26 Posts
peteg posted on 02-14-2012 8:24 AM

Hi,

I have a JR with the Y cable type DVI output, do the latest ones have two discrete DVI sockets on the back panel instead? Is a motherboard upgrade economic/feasible? I hate the Y-cable with a vengeance. (My JR is out of warranty so I'm happy to do it myself).

Thanks,

Pete

All Replies

Top 10 Contributor
1,249 Posts

Hi Pete -

Do you have the DVI outputs on the back of your console at all or just a VGA output? If you see 2 DVI outputs and a VGA, then please give Tech Support a call, as they can give you the details on making your console Y-Cable-free. If you only have the single VGA port, then it would require a Motherboard change, and I'm not certain that that's possible to do with your console. Again, a call to Tech Support would be a good bet.

For technical support in the Americas, please call 608/831-4116, or toll-free in the U.S. at 800/688-4116.
For technical support in Europe, please call (+44) 20 8896 1000.
For technical support in Germany, please call (+49) 8024 4700-0
For technical support in Asia, please call (+852) 2799 1220.

Thanks much -

 

Sarah

Sarah Clausen

Market Manager, GmbH

ETC, Inc.

Top 500 Contributor
26 Posts

Hi Sarah,

Thanks for the reply. It has a single VGA output on the motherboard then the PCIe card with the Y-Cable out of it.

Pete

Page 1 of 1 (3 items) | RSS
Powered by Community Server (Commercial Edition), by Telligent Systems