Could you please add the Chauvet SlimPar Pro series of fixtures to your next device profile? Specifically the RGBA fixture in 10-channel mode, please.
Manual is here:
Under Club/DJ section.
As another idea, it would be great if you guys could come up with some kind of web cross-reference tool where we could see if an existing fixture profile is close enough. For example:
Step 1 - select general family - LEDs, scrollers, movers, etc.
Step 2: Select sub-type - CMY, RGB, RGBA, etc.
Step 3: Select number of control channels
Step 4: - display the matching devices, and list the control layouts as you page through the fixtures.
If we could then narrow down the type of fixtures to search through for a match, there might be fewer new device requests.
Thanks very much!
Is there any word on when this profile will be available?
Do you have a user manual for these particular devices? The link goes a list of a great many fixtures.
Most of this kind of LED Par are one of the Generic fixtures.
With regards to finding a suitable alternate, the complete library details can already be downloaded from our website and searched, have you had a look at this yet?
Keep on trying till you run out of cake.
ETC Field Service, London
The fixture is the Chauvet SlimPar Pro RGBA, in my case. Due to the construction of the Chauvet website, the link in my first post is the best, but it is easily navigated, as I mentioned:
Under the Club/DJ section, select the SlimPar Pro RGBA.
There is not a compatible fixture in the library for this fixture in 10-channel mode - it's much more sophisticated than a generic RGBA can. A native profile - especially for the 10 channel mode would be greatly appreciated.
I talked to someone in your support department a couple months ago and they found that a profile had been created for Ion or Eos - I can't remember. Having this available for the SmartFade ML would be a wonderful help.
Here is the 10CH page from the manual.
I am in a bit of a hurry. I am VERY new to both the SmartFade and the Slimpar Pro. (They were delivered Friday.) I know I can manually build the personality, but am having trouble becasue I have not had time to learn all the ins and outs of the console. I will keep trying to create the personality myself, but if this is created soon I would greatly appreciate it. The other fixtures I have were in the latest library, and that was so easy to set up.
Attached to this post is a user personality for the SlimPAR Pro RGBA fixture in 10ch mode that you can import into your show.
Dimmer Speed is on "User 1", Auto Program and Auto Program Speed are on "FX1" and "FX1 Mod" respectively.
Thank you so much for the quick response!