I noticed that there doesn't seem to be a way to control the prism on a martin roboscan 918 with my ion. Is there a way I can add that control parameter under the "custom" page of encoders? I am using the "roboscan pro 918 M2 GS" personality.
We are looking at the profile now to see if there is a problem with it. Right now, we are using the "custom" page as a place to drop control of multiple intensity devices. Eventually, this is where you'll be able to define your own encoder layouts. But even when that is done, if there is a problem with the profile, this won't fix it.
Back soon.
Thanks,
a
Anne Valentino
Eos Product Line Manager
I have 4 roboscan 918s in my rig and have had no problems controlling the prism. It's in the beam parameters, or on the image encoders. The ML control shows them as Rot +/-/off Macros Off.
Edited to add. The virtual encoders appear to load strangely in 1.8.0. I'm not at the theatre so I can't verify the real encoders behave properly and load the prism controls on encoder 4, as I remember them doing.
That's got it!
Thanks!