Is there a way to make a list (print out) of all used channels WITHOUT the channels at zero?
thanks
Morning. Not at the moment. At the beginning of the .pdf is a list of all used channels. Because a channel stored at zero (which is a used channel) is considered differently than a channel with a "null" ... or no value at all. Can I ask why you end up with channels stored at zero that never move higher than zero?
Thanks,
a
Anne Valentino
Eos Product Line Manager
I was looking for unused channels this morning, and found two probable sources of channels stored at 0 that never move higher than 0. The first were some clearly dyslexic channels, e.g. 89 is a channel in the show, 98 is unpatched but has a 0 value in a cue. I believe that the channel was brought up, either via designer or programmer error, and we put it [out] instead of [undo] or [at] [enter]. The hard 0 got recorded in the cue.
The other were channels that were part of a group but not used. When I took the group out, which included some inactive channels, the inactive channels got recorded as hard zeros.
I couldn't find a way to query these (though querying Cue first thru enter showed the obviously errant channels). Going through and cleaning up all the partial blocks got rid of the zero-only channels.
-Josh
Thanks for answering,
We end up with zeros of channels that have been selected and put at a value and put at zero while programming.
They have not been taken out just put at zero. This is something you're working on I heard, not to show zero channels.
Best regards
Robin