I am programming a show that Q List one is running conventionals and Q List 2 is running an LED Light Wall. I am running 2 desks, one as User 1 with Partitions to the Conventionals, 2nd User 2 with partitioned to the LED Wall. I will be executing List 2 by List 1 with the execute 2/ on first cue. Right now, I am only executing the buttons while we get everything in the board.
I noticed something funny though when we went to a bump, List 2 did not mark when fired by list 1, it took the correct cue, and if I hit go it would mark fine. Will this be resolved when I link the entire List, or do I need to make marks the old fashioned way?
Thanks
Jay
Jay, I'm not quite sure what you mean by "I'm only executing the buttons while we get everything in the board."
Lights in list 2 should be marking properly when the cue list is executed via an external link. Can you drop me a copy of your show file, and let me know the cues you are seeing this behavior on?
Thanks!
a
Anne Valentino
Eos Product Line Manager
Error on my part, I figured it out. Thanks for the help.