Attached is a document listing the new devices in the Eos Family Library since the 1.4.5 release (Eos/Ion).
Thanks!
a
Anne Valentino
Eos Product Line Manager
Thanks A!!
:^)
S
I am disappointed to see that with all the Microh fixture additions, the Microh LEDP64 is not listed. This is a RGB color mixing PAR can, using LEDs and 4 DMX channels.
Dale, library additions are driven by:
Newly released product from major manufacturers and
User request
I assume you have these devices and need this profile? If so, we can add as a library patch. Please advise (I'm only asking as sometimes people comment about a device that is missing, when they don't - in fact - actually have that device).
Thanks,
Hi Anne, yes I have them - 22 of them. It wasn't that difficult to make a custom profile for patch but it would be nice to have them in the library.
Please check your email!
Thanks much!
Anne-
Wondering about the Chauvet COLORDash Quad. I didnt see it in the library, but is there something similar to it that would work? I know that you can usually find something that is similar, but wasnt sure.
Most of the Chauvet COLORDash Quad modes match Generic fixtures precisely:
3-channel Mode: Generic > RGB
4-channel Mode: Generic > RGBI
12-channel Mode: 4 copies of Generic > RGB
The 10-channel mode probably doesn't have a direct match.
Keep on trying till you run out of cake.
Any chance the G-lites product line can be added into the library?
Joey
Joey, could you tell us exactly which models you need?
600SZ and 600WZ
Great. Thanks!..
Speaking of library enhancements, has the fixture profile editor been enhanced at all thus making it easier to "roll your own"? I have not yet had a chance to load 1.7 to look at it . . .
- Tim
Anne,
When you publish a list such as this one, does it have only added fixture profiles or do you include profiles that have been updated as well.
Gregg Snider,
Master Electrician
Renée and Henry Segerstrom Concert Hall, Orange County PAC
This is actually just a list of new devices. One of the things we will add in a near term release is a highlight in the "fixtures" tab in patch, telling you which fixtures in your show have updated library information. That will allow you to easily see which devices have changed, and decide if you want to update your library (on a per device basis) or not.