Electronic Theatre Controls
Welcome to ETC's Online Community

ION Not "Releasing" Intensities After Go

rated by 0 users
Answered (Not Verified) This post has 0 verified answers | 1 Reply | 1 Follower

Not Ranked
4 Posts
ShawnHMaxwell posted on 04-13-2009 8:21 PM

I'm working on an ION, and when I'm running through a cue list and bring up some channels then press go (without recording), the channels keep "captured" (but I don't have capture mode enabled).  I'm not sure if a setting got changed somewhere or if I'm just missing something...  But when I press {Back/Stop} in the cue that I brought them up in they fade to their original cue data.  Any help would be greatly appriciated. 

Thanks
Shawn

  • Filed under:

All Replies

Top 75 Contributor
170 Posts
Suggested by jbenghiat

Channels that are active (selected) on the command line re essentially captured.  You see yellow border around their tombstones, and if you were to press the [at] button with a terminated command line, those channel numbers get posted to the command line.  Press [clear] and they are no longer captured.  You can also make another selection (which captures a different set of channels) or perform a function that doesn't use a channel selection, like record.

This is definitely a feature and works the same way on the Obsession.

-Josh

Page 1 of 1 (2 items) | RSS
Powered by Community Server (Commercial Edition), by Telligent Systems