Hi all,
I'm sure you can do this but not sure how.
Say I have a Dyn effect or any other effect, Can I change the rate when the Dyn is running...The only way I see how to do this is on the LCD. I'm looking for a TAP function like I use for chases !!!!
e.g....I have my Mac 300 doing a MISS PIGGY Dyn can I tap out the rate or access this quickly.
Carlos
Carl Knapper Chief Crewe Lyceum Theatre Crewe http://www.lyceumtheatre.net/ 07736445790 carl@cbkproduction.co.uk www.cbkproduction.co.uk
You can put any attribute directly onto a Master.
Hold down the Wheel Key for the attribute, and hit the Master Key.
This Master now contains that attribute, and will adjust this attribute in any selected Device or Effect Playback.
Obviously this works better for some attributes than others!
Keep on trying till you run out of cake.
I did this but when you bring the master up it starts at 0 so stops the Rate !!!!!
Carl
The Master at 50% is the 'Rate=100" position, so I'd suggest moving the Master to the 50% mark either before selecting the Effect Playback, or before assigning the Rate to the Master.